[jhb] Re: Rebuild
- From: "tom smith" <ftd.smith@xxxxxxxxxxxxxx>
- To: <jhb@xxxxxxxxxxxxx>
- Date: Sat, 6 Aug 2011 21:43:43 +0100
The usb3 port is part of the MB. The hd is a 1TRB and part of the free agent
gofelx external drive that came with two bottom pieces which are
interchangeable .one is used when connected to usb2 the other when
connected to the usb3 port .
I think I brought it from dabs or rather Sheila did as a present
tom
-----Original Message-----
From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf
Of Gerry Winskill
Sent: 06 August 2011 20:33
To: jhb@xxxxxxxxxxxxx
Subject: [jhb] Re: Rebuild
Tom,
Are your USB 3 sockets part of the Mobo, or have you used a PCI E
version USB card?
Next, which HD are you using with it?
Gerry Winskill
On 04/08/2011 20:31, tom smith wrote:
> I have tried the all in one on it and I couldn't tell the difference
between
> it and the all in one on my hard drive.
> tom
>
> -----Original Message-----
> From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf
> Of Gerry Winskill
> Sent: 04 August 2011 20:02
> To: jhb@xxxxxxxxxxxxx
> Subject: [jhb] Re: Rebuild
>
> Tom,
>
> Do you use the USB3 External Drive just for backup or is it fast enough
> to use as a normal HD?
>
> Gerry Winskill
>
> On 04/08/2011 19:44, tom smith wrote:
>> My Free agent Goflex external drive is usb3 15 times faster than usb2
>>
>> tom
>>
>> *From:*jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] *On
>> Behalf Of *Fossil
>> *Sent:* 03 August 2011 01:41
>> *To:* jhb@xxxxxxxxxxxxx
>> *Subject:* [jhb] Rebuild
>>
>> Most of the important software is now running and most have been hassle
>> free. Hardware generally seems to have worked on plugging in with W7
>> grabbing the correct updates for each unit - I've hardly touched any
>> installation disks. The only two items not working yet are the Logitech
>> Videocam 5000 (no W7 drivers) and the scanner. I'll dump the webcam as I
>> can't remember why I got it. I think the scanner may be OK once I
>> replace the Firewire cable with USB2.
>>
>> The mobo comes with two USB3 sockets but I suspect it is ahead of its
>> time just yet.
>>
>> With things going well so far I'll let the system settle down for a few
>> days and have a break from endless installation programs. When I recover
>> I'll start digging out the endless FS disks lying around and see what
>> the next steps are. My intention is to start off with FS2004 installed
>> as I am familiar with that and have lots of payware scenery and aircraft
>> for it. Then it will be fun trying to dig out the stick, pedals, Track
>> IR and Go Flight units to see if they remember how to work.
>>
>> bones
>>
>> bones@xxxxxxx
>>
>> http://woodair.net
>>
>
>
>
Other related posts:
