Have you tried Auto-Graphics Labeler from within your System Tray?
Also, check your Graphics Verbosity.
Adam
Robert McCoy wrote:
Both ctrl-shft-f11 and jaws-f11 produce the same results. Tabbing to the
systrey allows me to read the same icons as the ctrl-shft-f11 and jaws-f11,
but it also says button several times. The buttons are the other items
identified by jaws 6.
Robert McCoy 506-459-6636
-----Original Message----- From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Adam Sent: Sunday, October 23, 2005 11:34 AM To: jfw@xxxxxxxxxxxxx Subject: Re: sys trey and jaws 6x versus 7
Hi Robert,
Could you please do the following test with Jaws 7 without using Insert + F11?
Test #1: Windows behavior via its own keystrokes.
Tab to your System Tray and see if Jaws 7 is able to read all listed icons. Since Jaws 6 is able to detect all of them, this test should be successful.
Test #2: Jaws 7 Virtual Viewer.
View the System Tray items using Control + Shift + F11. Normally, Jaws 7 should list all items and read them. If Jaws is able to detect all items then we have a consistency problem because Insert F11 doesn't work properly. Here, I would revisit my Configuration Manager, check related settings, and further troubleshoot. If Jaws 7 doesn't detect all items, then I would simply consider repairing or re-installation.
In case of total failure, I would check any update for my video driver, check my Windows settings and updates, and finally, FS will be my last resort.
Please keep us posted.
Best regards,
Adam
Robert McCoy wrote:
Not the display settings, I did say that jaws 6 works properly,
jaws 7 does
not.
Robert McCoy
506-459-6636
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf
Of Robert Hebert
Sent: Sunday, October 23, 2005 3:58 AM
To: jfw@xxxxxxxxxxxxx
Subject: Re: sys trey and jaws 6x versus 7
Robert, check your display settings--recent Windows updates changed
some of
my settings automatically.
----- Original Message -----
From: "Robert McCoy" <rmccoy@xxxxxxxxxxxxxxx>
<mailto:rmccoy@xxxxxxxxxxxxxxx> To: "Jfw" <jfw@xxxxxxxxxxxxx> <mailto:jfw@xxxxxxxxxxxxx> Sent: Saturday, October 22, 2005 12:35 AM
Subject: sys trey and jaws 6x versus 7
When I load jaws 7 and check my system trey by using insert f11 jaws
will
identify one or two items, and not jaws itself. If I simply unload
jaws 7
and load jaws 6 it will identify several more programs that are
present on
the sys trey. Any suggestions as to why jaws 7 does not work
properly and a
possible solution. I am running XPHome, on a dell inspiron laptop
with an
ATI Mobility radeon 9200 vid card.
Robert McCoy
506-459-6636
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the
list, or the
way the list is being run, do not post them to the list. Rather
contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the
list, or the
way the list is being run, do not post them to the list. Rather
contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the
list, or the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw
