Re: Replying directly to sender in JAWS 9
- From: "Bob Verity" <rtverity@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sat, 1 Dec 2007 20:03:40 -0600
FSI's problem, as I see it, is that they do not do an adaquit job of
regression testing of their products before they are moved into production.
I also believe that a major cause of their problems is a lack of strict
coding standards where there are no exceptions and the absolute enforcement
of these standards. Programmers like to be indivualists and do things their
way and not be confined with rules, especially rules that they can't break.
The genius that wrote a given module of code may not be around when that
module needs to be revised and now the poor slob, who has to maintain the
code, obviously lacking the genius level intelegence of the original author,
has to decipher the convoluted rat's nest of code in order to make some
minor revision.
Sorry about the soap box just something I am adamant about.
----- Original Message -----
From: "Don Moore" <donmoore@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Saturday, December 01, 2007 6:50 PM
Subject: Re: Replying directly to sender in JAWS 9
Hi Bob,
That is a very good question. Of course, I have no way of checking that
for Cindy now, since her E-mail address is definitely in my address book at
this point. However, I checked to make sure that your E-mail address wasn't
in my address book, then I tried using the Insert Shift r command to reply
directly to you.
The result was that I got the following message:
"Check names dialogue. No matches found for Bob Verity. Show more names
button." (end of quote)
When I clicked on the "Show more names button," I got the following message:
"Check names dialogue. Select who you mean by Bob Verity." (end of quote)
So, it seems that this feature no longer works unless the person's
E-mail address is already in your address book. Isn't that wonderful!!!
Regards,
Don
----- Original Message -----
From: "Bob Verity" <rtverity@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Saturday, December 01, 2007 6:46 PM
Subject: Re: Replying directly to sender in JAWS 9
> Don,
>
> Was Cindy's email address already in your address book? I received the
> same
> message that Cindy described, that is it prompted me to supply an email
> address.
>
>
> ----- Original Message -----
> From: "Don Moore" <donmoore@xxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Saturday, December 01, 2007 4:25 PM
> Subject: Re: Replying directly to sender in JAWS 9
>
>
> Hi Cindy and list,
>
> I just used the Insert Shift r command to reply to this post directly
> to
> Cindy and it seems to have worked all right.
>
> Here is the reply I received from Cindy:
>
> Yes, it did. But, when I do it, I get a message saying something about
> select recipient and then wants me to choose from my address list. I've
> never seen that before when using that command.
>
> Cindy
> ----- Original Message -----
> From: "Don Moore" <donmoore@xxxxxxxxxxx>
> To: "Cindy Handel" <cindy425@xxxxxxxxxxx>
> Sent: Saturday, December 01, 2007 5:18 PM
> Subject: Re: Replying directly to sender in JAWS 9
>
>
>
> Cindy,
>
> I just tried the Insert Shift r command with JAWS 9 on your post. Did
> it
> work?
>
> Don
> ----- Original Message -----
> From: "Cindy Handel" <cindy425@xxxxxxxxxxx>
> To: "JFW" <jfw@xxxxxxxxxxxxx>
> Sent: Saturday, December 01, 2007 2:17 PM
> Subject: Replying directly to sender in JAWS 9
>
>
>> The feature of insert shift r to reply directly to a sender doesn't seem
>> to
>> work in JAWS 9. It says "replying to sender" when I press it, but only
>> the
>> sender's name shows up and OE doesn't recognize it as an email address.
>> Has
>> this changed?
>>
>> Cindy
>>
>>
>> "Determine that the thing can and shall be done, and then...find the
>> way."
>> Abraham Lincoln
>>
>>
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list:
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> ----- Original Message -----
> From: "Cindy Handel" <cindy425@xxxxxxxxxxx>
> To: "JFW" <jfw@xxxxxxxxxxxxx>
> Sent: Saturday, December 01, 2007 2:17 PM
> Subject: Replying directly to sender in JAWS 9
>
>
>> The feature of insert shift r to reply directly to a sender doesn't seem
>> to
>> work in JAWS 9. It says "replying to sender" when I press it, but only
>> the
>> sender's name shows up and OE doesn't recognize it as an email address.
>> Has
>> this changed?
>>
>> Cindy
>>
>>
>> "Determine that the thing can and shall be done, and then...find the
>> way."
>> Abraham Lincoln
>>
>>
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list:
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
