RE: [Bulk] RE: [Bulk] Research It and UPS
- From: Adrian Spratt <Adrian@xxxxxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sun, 13 Mar 2011 13:27:16 -0400
Then I misunderstood what you originally wrote. I am aware of the other
reports. Thanks for clarifying.
_____
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Yadiel Sotomayor
Sent: Sunday, March 13, 2011 1:20 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: [Bulk] RE: [Bulk] Research It and UPS
A number of persons on this list has expressed problems when transfering
settings using the merge utility in jaws. However, I transferred the
settings without any such problems. Since I did not experience the problems
I am going to let the people who did to mention them. Like I said, I have
the luck of the devil because I did not experience any problems at all.
From: Adrian Spratt <mailto:Adrian@xxxxxxxxxxxxxxxx>
Sent: Sunday, March 13, 2011 12:03 PM
To: jfw@xxxxxxxxxxxxx
Subject: RE: [Bulk] RE: [Bulk] Research It and UPS
Could you elaborate on what the settings transfer problem was and how you
fixed it?
_____
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Yadiel Sotomayor
Sent: Sunday, March 13, 2011 11:58 AM
To: jfw@xxxxxxxxxxxxx
Subject: Re: [Bulk] RE: [Bulk] Research It and UPS
I have both jaws 11 and 12 on my computer. No problems when installing 12
over 11. The only problem was the settings transfer wich (I believe that I
have the luck of the devil because it worked for me) nothing that a merge
utility could not fix.
From: Adrian Spratt <mailto:Adrian@xxxxxxxxxxxxxxxx>
Sent: Sunday, March 13, 2011 11:30 AM
To: jfw@xxxxxxxxxxxxx
Subject: RE: [Bulk] RE: [Bulk] Research It and UPS
Thanks to you, John, and the others who responded to my query. I'm running
out of excuses to upgrade.
_____
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of john.falter
Sent: Saturday, March 12, 2011 11:09 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: [Bulk] RE: [Bulk] Research It and UPS
I had no trouble installing JAWS 12, and I have 11,10, and 9 installed.
----- Original Message -----
From: Adrian <mailto:Adrian@xxxxxxxxxxxxxxxx> Spratt
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, March 12, 2011 3:12 PM
Subject: RE: [Bulk] RE: [Bulk] Research It and UPS
I should have thought of this. The fix would have to come through an update.
Another incentive to bite the bullet and install JAWS 12, which raises a
separate question. It might have been you, Dave, who warned listers that FS
recommends removing prior versions of JAWS when installing version 12. I'm
even more reluctant to do that than I am to take on JAWS 12 before it's run
its fix cycle. Has anyone had good or bad experiences installing JAWS 12 but
keeping earlier versions?
_____
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Farfar Carlson
Sent: Saturday, March 12, 2011 3:02 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: [Bulk] RE: [Bulk] Research It and UPS
I think it's all been fixed with the latest JAWS 12. However that doesn't
help you, I know. I think Research It should be a separate module with a
separate update package, to avoid this.
The UPS site problems were fixed by FS at least once already in past
updates, and I hesitate to opine that they will fix a JAWS 11 version of
Research It now that JAWS 12 is fully established.
Dave
Composed on a Dell Latitude 630 in the general vicinity of my Audio
Recording and Mixing Studios, San Francisco Bay Area.
----- Original Message -----
From: Adrian Spratt <mailto:Adrian@xxxxxxxxxxxxxxxx>
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, March 12, 2011 11:37
Subject: [Bulk] RE: [Bulk] Research It and UPS
JAWS 11. Sorry for the omission.
_____
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Farfar Carlson
Sent: Saturday, March 12, 2011 2:27 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: [Bulk] Research It and UPS
JAWS 12?
Dave
Composed on a Dell Latitude 630 in the general vicinity of my Audio
Recording and Mixing Studios, San Francisco Bay Area.
----- Original Message -----
From: Adrian Spratt <mailto:Adrian@xxxxxxxxxxxxxxxx>
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, March 12, 2011 11:06
Subject: [Bulk] Research It and UPS
I just put a tracking number into Research It and clicked on UPS. The result
came back as no such tracking number found. Then I copied the exact same
number into Google, which came up with the package I'd shipped and confirmed
delivery.
I vaguely recall someone else reporting the same problem on the list. Either
way, don't count on Research It to give you an accurate answer, at least
when it comes to UPS information.
Yadiel J. Sotomayor
E-MAIL: yadosotomayor@xxxxxxxxxxx
Yadiel J. Sotomayor
E-MAIL: yadosotomayor@xxxxxxxxxxx
Other related posts:
