hey I did the test. and yippie it worked. I probably didn't have to press
control shift n but I did. then I hit controm mike. and it said "not
available you must be in the critical objects place or something like that
press right arrow. I pressed right arrow and it said "critical objects and I
hit control m for mark all and hit control november and it said seven
objects will be removed. So control m marks all and it works fine.
Dean,
I'll try to do this, but I won't be able to do it until later in the day,
or, more likely, tomorrow morning because health problems I'm having make
it hard to concentrate on something methodical like this except for a couple
of hours each day, usually early. If you don't mind waiting a bit, I'll
follow these directions and report my experience, but not immediately. Hope
this will help.
Daniel
----- Original Message ----- From: "Dean Schmidt" <dschmidt1991@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Friday, July 08, 2005 1:06 PM
Subject: Re: AdAware scripts, different problem
Could one of you guys that are having this problem do a test for me? 1 Run a scan as you normally do. 2 When the scan is finished, pres control+n. 3 Now press control+shift+n. It should say Scanning results screen. 4 Start repeatedly pressing the tab key. You should hear the following controls, although you may not start out on the first one in the list. Scan summary tab list view (with its information) Help button Show logfile button Next button Scanning results screen help button Then if you keep pressing tab you should arrive again at the Scan summary tab and repeat the list over again. Do you hear all of these items? Are there any tab positions where Jaws speaks nothing? Dean
----- Original Message ----- From: "Allen Maynard" <Allen@xxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Friday, July 08, 2005 12:16 PM
Subject: Re: AdAware scripts, different problem
Hi, Daniel and listers,
I'm having the same problem. I am using Jaws 60 and Windows 2000. I also
recompiled the scripts but there was no change.
Sincerely,
Allen Maynard Access Technology Specialist The Hadley School for the Blind E-Mail: allen@xxxxxxxxxx Phone: 800-323-4238 Ext. 2803
"Yardbird" <yardbird@xxxxxxxxxxxxxx> 07/07/05 11:06PM >>>Dean, I've installed and compiled the scripts, an the same for the upgrade of AdAware SE 1.06. Either I'm doing something wrong or there's a problem with the script. I wonder if you can tell from this description: I'm using Jaws 6.0, Windows XP Home Edition.
All I want to do is run AdAware in the simplest way, where you do the scan
(either the Smart Scan or, at least to begin with, the full scan, and then
mark and delete all critical objects. That was the way I used Version
1.05,
and it satisfied me.
I read your excellent HTML instructions and then referred back to them when I had trouble, and attempted the process over again. but still no luck. Here's what happens. I successfully performed the Web Update, and then went on to do a scan. At the end of the scan, I expected to find myself on the Scan Results page, where the instructions said I'd be on the Scan Summary button. I wasn't. Rather, Jaws said "Scan Results Help button."
I tabbed around to see if I could land on the Scan Summary button in order
to go to the next step, but it wouldn't appear for me. I switched to the
Jaws cursor just to explore and make sure that the Scan Summary button was
on this display, and it was, but I couldn't reach it in the way the
instructions describe.
I tabbed around, but just came to a Help button and a couple of other things, but not the Scan Summary button. I tried to right arrow and left arrow to see if I could reach the Critical Objects tab, but mostly Jaws was silent when I pressed the arrow keys, no matter which direction or how many times I pressed.
Just to see what would happen, I pressed Control M anyway, but got a message that I needed to be on the Critical Objects position or the harmless objects position, you know the one I mean. Negligible? Innocuous?
Anyway, so I pressed Control N to see what message I'd get then, and heard
that I hadn't deleted any of the critical objects and asking me if I
wanted
to proceed or cancel.
I tried the whole thing twice, rereading the instructions in between to be
sure I was following the steps properly. What could I be doing wrong? I
compiled the scripts again, just to be sure, right while I was in the open
program, so I didn't even have to worry about finding them to compile.
I hope I've described my experience clearly. Any ideas? Thanks.
Daniel
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.10/43 - Release Date: 7/6/2005
-- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
-- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.11/44 - Release Date: 7/8/2005
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.11/44 - Release Date: 7/8/2005
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
-- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw
