[jawsscripts] Re: Speaking a text with a specified voice?
- From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
- To: <jawsscripts@xxxxxxxxxxxxx>
- Date: Mon, 11 Feb 2013 14:58:43 +0200
OK, I will try, although I am not sure that function will be able to set a
voice from a voice synthesizer which has not been loaded.
--Octavian
----- Original Message -----
From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
To: <jawsscripts@xxxxxxxxxxxxx>
Sent: Monday, February 11, 2013 12:56 PM
Subject: [jawsscripts] Re: Speaking a text with a specified voice?
> Hi
> So sorry because of my misunderstand. I don't have any experience of
> SetActiveProfile function. However, you can do the simula thing to a profile
> by use the functions wich start by "setVoice"
> Hope that help, and again, sorry for my misunderstand.
> ----- Original Message -----
> From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
> To: <jawsscripts@xxxxxxxxxxxxx>
> Sent: Monday, February 11, 2013 3:36 PM
> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>
>
>>I gave the code in my first message. Here it is again:
>>
>> SetActiveVoiceProfileByName ("Carmen2")
>> SayString(sTrText)
>> SetActiveVoiceProfileByName ("Eloquence")
>>
>> The first line changes the voice to a specified voice profile, then it
>> should speak the message and then it should change the voice profile back
>> to Eloquence.
>> But the third line is executed immediately, and when it is executed, the
>> previously synthesizer is stopped so it doesn't speak anything.
>>
>> Thanks.
>>
>> Octavian
>>
>> --Octavian
>>
>> ----- Original Message -----
>> From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
>> To: <jawsscripts@xxxxxxxxxxxxx>
>> Sent: Monday, February 11, 2013 10:22 AM
>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>
>>
>>> Hi
>>> I don't do that for a long time, but if you could send me your code, I
>>> think
>>> I could help you.
>>> Cuong.
>>> ----- Original Message -----
>>> From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>> Sent: Sunday, February 10, 2013 11:22 PM
>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>
>>>
>>>> Thanks, but as I said, I tried in 2 ways:
>>>>
>>>> 1. SetActiveVoiceProfileByName ("Carmen2")
>>>>
>>>> 2. I also tried using SetSynth ("eloq") but it didn't help either.
>>>>
>>>> The problem is that when a new voice is activated, it shuts Jaws down so
>>>> the
>>>> text spoken with the previous voice is not spoken at all.
>>>>
>>>> --Octavian
>>>>
>>>> ----- Original Message -----
>>>> From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
>>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>>> Sent: Sunday, February 10, 2013 3:37 PM
>>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>>
>>>>
>>>>> Hi
>>>>> Use SetSynth to swich to the synthesizer of choice, and use
>>>>> SetVoicePerson
>>>>> to set name.
>>>>> HTH
>>>>> Cuong
>>>>> ----- Original Message -----
>>>>> From: "Octavian Rasnita" <orasnita@xxxxxxxxx>
>>>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>>>> Sent: Sunday, February 10, 2013 3:07 PM
>>>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>>>
>>>>>
>>>>>> Thanks Stefan and Doug. Unfortunately it seems that there is no way to
>>>>>> instruct JAWS to speach a piece of text with a specified synthesizer,
>>>>>> although I was sure that this should be a simple thing.
>>>>>>
>>>>>> --Octavian
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "Doug Lee" <doug.lee@xxxxxxxxxxxxxxxx>
>>>>>> To: <jawsscripts@xxxxxxxxxxxxx>
>>>>>> Sent: Sunday, February 10, 2013 12:45 AM
>>>>>> Subject: [jawsscripts] Re: Speaking a text with a specified voice?
>>>>>>
>>>>>>
>>>>>>> SpeechInUse() actually tells you only whether or not speech, as
>>>>>>> opposed to Braille output, is being used by the JAWS user. It does
>>>>>>> not
>>>>>>> tell you when something is actually being said.
>>>>>>>
>>>>>>> On Sat, Feb 09, 2013 at 08:05:57PM +0200, Stefan Moisei wrote:
>>>>>>> Hi,
>>>>>>> The function SpeechInUse() should tell you if jaws is speaking or
>>>>>>> not.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Octavian Rasnita
>>>>>>> Sent: Saturday, February 09, 2013 5:29 PM
>>>>>>> To: jawsscripts@xxxxxxxxxxxxx
>>>>>>> Subject: [jawsscripts] Speaking a text with a specified voice?
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Is it possible to create a JAWS script that speaks a text with a
>>>>>>> specified
>>>>>>> installed voice, then after it finishes, switch back to the default
>>>>>>> voice?
>>>>>>>
>>>>>>> I tried:
>>>>>>>
>>>>>>> SetActiveVoiceProfileByName ("Carmen2")
>>>>>>> SayString(sTrText)
>>>>>>> SetActiveVoiceProfileByName ("Eloquence")
>>>>>>>
>>>>>>> But nothing is spoken. When the function
>>>>>>> SetActiveVoiceProfileByName()
>>>>>>> is
>>>>>>> called the second time, it stops immediately the speech.
>>>>>>>
>>>>>>> I have found this by doing:
>>>>>>>
>>>>>>> SetActiveVoiceProfileByName ("Carmen2")
>>>>>>> SayString(sTrText)
>>>>>>> Delay (50, TRUE )
>>>>>>> SetActiveVoiceProfileByName ("Eloquence")
>>>>>>>
>>>>>>> This time the text was spoken as wanted, but I wasn't able to use the
>>>>>>> computer for a few seconds after that, because of the Delay()
>>>>>>> function.
>>>>>>>
>>>>>>> I guess that it is not possible to calculate how much time it would
>>>>>>> take
>>>>>>> to
>>>>>>> speak a certain text with a specified voice, but isn't possible to
>>>>>>> detect
>>>>>>> somehow when JAWS finished speaking, in order to be able to switch
>>>>>>> the
>>>>>>> voice
>>>>>>> in that moment?
>>>>>>>
>>>>>>> I also tried using SetSynth ("eloq") but it didn't help either.
>>>>>>>
>>>>>>> Thanks.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --Octavian
>>>>>>>
>>>>>>> __________???
>>>>>>>
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>>
>>>>>>> __________???
>>>>>>>
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>>
>>>>>>> --
>>>>>>> Doug Lee, Senior Accessibility Programmer
>>>>>>> SSB BART Group - Accessibility-on-Demand
>>>>>>> mailto:doug.lee@xxxxxxxxxxxxxxxx http://www.ssbbartgroup.com
>>>>>>> "While they were saying among themselves it cannot be done,
>>>>>>> it was done." --Helen Keller
>>>>>>> __________�
>>>>>>>
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>>
>>>>>>
>>>>>> __________�
>>>>>>
>>>>>> View the list's information and change your settings at
>>>>>> //www.freelists.org/list/jawsscripts
>>>>>>
>>>>> ________________ Dang Manh Cuong HCMC University of Pedagogy: The
>>>>> Educational Psychology Mobile: +84 902-572-300 E-mail:
>>>>> dangmanhcuong@xxxxxxxxx Yahoo! ID: manhcuong0312 Skype name:
>>>>> dangmanhcuong
>>>>> facebook:
>>>>>
>>>>> __________�
>>>>>
>>>>> View the list's information and change your settings at
>>>>> //www.freelists.org/list/jawsscripts
>>>>>
>>>>
>>>> __________�
>>>>
>>>> View the list's information and change your settings at
>>>> //www.freelists.org/list/jawsscripts
>>>>
>>> ________________ Dang Manh Cuong HCMC University of Pedagogy: The
>>> Educational Psychology Mobile: +84 902-572-300 E-mail:
>>> dangmanhcuong@xxxxxxxxx Yahoo! ID: manhcuong0312 Skype name:
>>> dangmanhcuong
>>> facebook:
>>>
>>> __________�
>>>
>>> View the list's information and change your settings at
>>> //www.freelists.org/list/jawsscripts
>>>
>> __________�
>>
>> View the list's information and change your settings at
>> //www.freelists.org/list/jawsscripts
>>
> ________________ Dang Manh Cuong HCMC University of Pedagogy: The
> Educational Psychology Mobile: +84 902-572-300 E-mail:
> dangmanhcuong@xxxxxxxxx Yahoo! ID: manhcuong0312 Skype name: dangmanhcuong
> facebook:
>
> __________�
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
>
__________�
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
Other related posts:
