[jaws-uk] Re: JAWS working with other kinds of Software!
- From: "Barry Hill" <bbinc@xxxxxxxxxxxxx>
- To: <jaws-uk@xxxxxxxxxxxxx>
- Date: Thu, 31 Aug 2006 10:10:30 +0100
Hi
These instructions are off the jfw light site or the whitestick.com site, I
can't remember which:
When you tab you should hear all the buttons. Scan now, settings, web
update, etc. You can press the space bar on a button to activate it.
When you press insert H you should get hotkey help.
To begin, press control S for the scan now button.
You should hear select a scanning option, but all you have to do is press
control N for the next button.
As it scans you should hear messages like scanning drive C.
When it is done, you should hear finished and how many objects it found.
If no spyware was found, tab to finish and press the space bar.
If spyware was found, press control N for the next button.
This is where it lists the spyware. Jaws can't read this list,
even with the jaws cursor.
But if you press control M for mark all it should say all items were checked
and they should have been.
Press control N for next.
A dialog from ad aware should come up with an okay button. For now use your
jaws cursor or press insert B to read the dialog about the number of items
ad aware will remove.
Press the space bar on the okay button.
You are done.
You can look at the logs in C:\Program Files\Lavasoft\Ad-aware 6\Logs
with notepad to see what spyware was removed.
You can go to C:\Program Files\Lavasoft\Ad-aware 6\Quarantine and delete
the files that you find in that folder to delete all the files in
quarantine. It will have one file for each time you ran an ad aware scan.
Remember it is just as important now to keep your reference files
up to date in ad aware 6 as it was before. Now you do it from within ad
aware
6 itself instead of using the separate refupdate program. Here is what you
need to do. Remember in all these dialogs just press insert B or use your
jaws cursor to review the information.
Tab to the web update button and press the space bar.
Review the information.
Tab to connect and press the space bar.
It will tell you if you are up to date, and just press the space bar on
okay.
If you need to update your ref files, it will tell you a newer version is
available and ask you if you wish to download them. Again, just press the
space bar on okay. When it is done, you can tab to the finish button and
press the space bar.
The only differeence to note in the scripts for below Jaws 4.0 is Control O
is used
to select the other dialogs for ad aware such as settings
and web update to update your reference files. Note for both set of
scripts,
these have not been scripted yet, so you will need to review these dialogs
with
your jaws cursor or insert B command.
Please send any problems or suggestions to debbie@xxxxxxxxxxxxxxxxx
So to summarize:
control S for scan now, control N to start the scan, control N when it is
done scanning, control M to mark all it finds, control N for next, space bar
on okay.
Barry
----- Original Message -----
From: "David Russell" <david.russell8@xxxxxxxxxxxx>
To: <jaws-uk@xxxxxxxxxxxxx>
Sent: Thursday, August 31, 2006 9:55 AM
Subject: [jaws-uk] Re: JAWS working with other kinds of Software!
> Hi all,
>
> Following recent discussions on this list, I decided I should have some
> Spyware on my pc and yesterday tried Adaware. I have installed the jaws
> scripts and run Adaware but, although it is detecting unwanted files, it
> is
> not deleting them? I know this because if I run the program again, it
> finds
> the same number of files. So, how do I delete the unwanted files?
>
> David
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** jaws-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
