[j-say list] Re: dragon 11.5
- From: "Ed. Rosenthal" <edward@xxxxxxxxxxxx>
- To: <j-say@xxxxxxxxxxxxx>
- Date: Thu, 22 Sep 2011 15:15:55 -0700
Gary- the T&T team and the beta testers are currently hard at work beta
testing the next JSay Pro from T&T Consultancy; so I'm anticipating soon.
Keep watching this listsrv for the Release announcement...ed.
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Bornsen, Gary L.
Sent: Thursday, September 22, 2011 2:06 PM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] dragon 11.5
Is j-say working with dragon 11.5? if not, any idea when it might be.
Thanks
gary
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Ed. Rosenthal
Sent: Thursday, September 22, 2011 10:16 AM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: voice profile selection
I'm anticipating that from your description below you have multiple users,
and so when you start your J-Say installation (i.e. Dragon) it announces
that multiple users are available and you can use your up and down arrows to
make a selection.
If you only have one user then you will not hit the open user dialog box and
the user profile loads automatically.
However, if you need multiple users there is a way to set the Dragon
executable so that it would load just a specific user, avoiding the open
user dialog box. It's been a while since I needed to look this up, but if
you need it just post again and I'll do some research -ed.
Yours sincerely,
Edward S. Rosenthal
President and CEO
Next Generation Technologies, Inc. (NGT, Inc.)
20006 Cedar Valley Rd. #101
Lynnwood, Wa. 98036
425-744-1100 ext.15
EM: edward@xxxxxxxxxxxx
URL: http://www.ngtvoice.com
Skype: ed.rosenthal7
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Martin, Sue W.
Sent: Thursday, September 22, 2011 7:45 AM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] Re: voice profile selection
Hi Stuart,
There's no voice command to select a user profile because Dragon isn't
actually loaded ready to receive voice input at that point. It's only ready
to receive voice input after J-Say tells you that the computer is ready for
you to talk to it or, if you have sounds enabled, you hear the chime sound.
Hope that helps.
From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
Behalf Of Stuart Deadman
Sent: Thursday, September 22, 2011 9:27 AM
To: j-say@xxxxxxxxxxxxx
Subject: [j-say list] voice profile selection
High list,
is there a J say command to select the voice profile dialogue? I have been
searching through the documentation but can't find one. I didn't know if I
was missing something.
Thanks in advance
Stuart Deadman
stupotuk@xxxxxxxxxxx
Other related posts:
