[iyonix-support] Re: Formatting "new" disc
- From: John Sandford <lists@xxxxxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Tue, 15 Mar 2011 18:34:03 +0000
Alan Adams <alan@xxxxxxxxxxxxxxxx> wrote:
> Having erased the partition using Windows it now shows as 5.
>
> A 160GB disc behaves the same way. Neither are recognised. The error is
> "cannot read drive identity".
>
> As the Iyonix was secondhand I can only use what's currently on the hard
> drive. I can't find HForm at all, but 2.56 is on the disc I want to copy,
> from a RO4.02 RPC.
>
>
Try just putting the drive on the cable as master on its own, I found on my
Iyonix that some drives did not like other drives on the same cable or as
master, but did work if swapped master/slave.
John
--
John Sandford
home
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx
Other related posts:
