-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 At 12:37 PM 7/25/2002, you wrote: >http://www.ISAserver.org > >Ok..new info J > >Stop restart FW...I also disabled the Packet filter created. > >Now the w32tm -v -once fails completely...seems to not be able to contact >the server or receive data from it. > >Now im even more confused :/ Sorry- I was in Linux-land configuring an Apache install and locking down IPChains ;) Took me a sec to get back in ISA-ville... OK- You've got to have the packet filter created, so re-enable that guy, leaving it dynamic. Let's run a network capture on the external interface- this way you can see if the packet is getting out and back to the external card which will let you know that there is something is your ISA config. If it gets out but not back it, it could be something at the router-- for instance, not only to I nail down ISA, but I have my Cisco access-lists nailed down to the host allow level- so I had to allow UDP 123 from tick.navy.mil into my network on the router as well... If you have time to do a netcap, that would be great. AD -----BEGIN PGP SIGNATURE----- Version: PGP 7.1 iQA/AwUBPUBjBYhsmyD15h5gEQIrkQCgkmpKLtu5w/YD2UQNiidyL8eJTccAoJlZ 5n2XJTatOo7k00I0yzCsa1XC =toaQ -----END PGP SIGNATURE-----