Im using the ISA Server itself for this. All local and Fixed 123 is setup...does it need to be changed to dynamic instead of all? Brian W. Rogers MCSE, MCT, MCP Client/Server Network Developer Tree of Life Corporation rogersb@xxxxxxxxxxxxxx office: (904)940-2152 mobile: (904)806-7173 -----Original Message----- From: Deus, Attonbitus [mailto:Thor@xxxxxxxxxxxxxxx] Sent: Thursday, July 25, 2002 2:59 PM To: [ISAserver.org Discussion List] Subject: [isalist] Re: NTP Time Server http://www.ISAserver.org At 11:50 AM 7/25/2002, Rogers, Brian wrote: >http://www.ISAserver.org > > > >Ok..this is drivin me up the frikkin wall here :/ > >Ive followed the instructions from the nettime.zip doc...imported the reg >settings provided...created the allow packet filter for UDP 123...and the >darn thing STILL will not synch with any time server I choose. > >Ive tried tick/tock/blah blah blah/.usno.navy.mil along with at least a >dozen other public time servers as my source..and every time I try net >time /set it returns the message > >"Could not locate a time server" > >I have verified it resolves the DNS names properly..and ive even tried >putting in the IP address alone instead...same result. > >When running w32time -v -once it goes through a variety of nifty looking >tests but always gives the following: Where is the box from which you are runnning w32time -v? Is is an SNat or FW client? I assume your PF is UDP Send receive with dynamic local port and fixed remote port 123, right? I've done this and it works fine. AD ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: rogersb@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')