[PCB_FORUM] Re: wasn't there a way to "mirror" geometries?
- From: george.h.patrick@xxxxxxxxxxxxx
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 14 Jan 2008 12:28:55 -0800
Yep.
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
<http://www.tektronix.com/>
http://www.tektronix.com <http://www.pcb-designer.com/>
http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
gnieski_mike@xxxxxxx
Sent: Monday, January 14, 2008 12:26
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: wasn't there a way to "mirror" geometries?
Never tried to mirror a module, works ok?
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxx
Sent: Monday, January 14, 2008 3:14 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: wasn't there a way to "mirror" geometries?
We typically try to do stuff like this as a module. Especially when we
are trying to exactly replicate the circuit. Then it can be easily
moved/rotated/mirrored without needing to reassign anything.
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
<http://www.tektronix.com/>
http://www.tektronix.com <http://www.pcb-designer.com/>
http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman
Sent: Monday, January 14, 2008 12:09
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] wasn't there a way to "mirror" geometries?
I have to match line and shape of some clines... is there a way to copy
and mirror this lines... of course I'll also have the issue of needing
to reassign the new nets to them. Anyone have any ideas for this?
These are not just matched length, but also matched curves and shapes of
clines.
Other related posts:
