Never tried to mirror a module, works ok? ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of george.h.patrick@xxxxxxxxxxxxx Sent: Monday, January 14, 2008 3:14 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: wasn't there a way to "mirror" geometries? We typically try to do stuff like this as a module. Especially when we are trying to exactly replicate the circuit. Then it can be easily moved/rotated/mirrored without needing to reassign anything. -- George Patrick Tektronix, Inc. Central Engineering, EDS Applications Support P.O. Box 500, M/S 39-512 Beaverton, OR 97077-0001 * 503-627-5272 (voice) * 503-627-5587 (fax) http://www.tektronix.com <http://www.tektronix.com/> http://www.pcb-designer.com <http://www.pcb-designer.com/> "Off-Grid and Proud of it!" -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman Sent: Monday, January 14, 2008 12:09 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] wasn't there a way to "mirror" geometries? I have to match line and shape of some clines... is there a way to copy and mirror this lines... of course I'll also have the issue of needing to reassign the new nets to them. Anyone have any ideas for this? These are not just matched length, but also matched curves and shapes of clines.