Hey folks, I reviewing a large opportunity to reverse engineer a few hundred obsolete PCB layout designs. Each design has different available data files. Some only have a pdf drawing of the etch and board dimensions. Others have unkown originated gerber files and apertures lists. I have downloaded the CAM350 tool and am currently undergoing learning that tools processes and capabilities. I was wondering if any of you out there have much experience with reverse engineering, the CAM 350 tool or could recommend alternative tools. The idea output would be to reverse engineer to create a Cadence Concept HDL schematic, BOM, full netlist, and layout the board for availability for fabrication and assembly. Any input would be appreciated. Thanx in advance. Jim S. Wages / SR. PCB Layout Designer (919) 484-2963 ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------