Hi Mike, Tim, Tony, Thank you very much, that seems to be exactly what I'm looking for. I downloaded valext.txt, and apparently extracta.exe is part of the Allegro installation, so I should be able to just run this and be happy. Regards, Austin > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Michael > Catrambone > Sent: Thursday, May 10, 2007 2:19 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Outputting "ASCII" from Allegro??? > Importance: High > > > Austin, > > By ASCII output that mean ASCII Output using Allegro Extract. If they > are using CAMCAD they should have access to the Allegro extract view > file called "valext.txt" which will output all the required files. Once > you have the "valext.txt" extract file you can run the following command > for a DOS/UNIX Command prompt: > > extracta <boardfile>.brd valext.txt <boardfile>.b <boardfile>.p > <boardfile>.s <boardfile>.r > > The order of the command line is very important because it maps to the > individual extract views inside of valext.txt file. I have an old copy > of this extract file if they cannot locate it for you but it is probably > best to use the latest and greatest file to avoid any problems with > extract or import into CAMCAD. > > Hope this helps, > Michael Catrambone > Distinguished Engineer > UTStarcom, Inc. > Phone: 847-631-9521 > Email: Michael.Catrambone@xxxxxxxxxx > Web: http://www.utstar.com > > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin > Sent: Thursday, May 10, 2007 1:03 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Outputting "ASCII" from Allegro??? > > Hi, > > I've been asked to convert an Allegro .brd file into something that can > be > read in by a program called CAMCAD. I've been told that it'll take an > "ASCII" output from Allegro, but I don't see any ASCII output capability > from Allegro in either the "Save As" or the "Export" selections. Any > suggestions? > > Regards, > > Austin > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------