Hi Austin, Try these links. You have to download a file from Router Solutions (second link) and run it in a DOS window against your Allegro .brd. It outputs files that are input to CamCad (first link). http://help.camcad.com/Importing/Cadence/allegroextract.html http://help.camcad.com/Importing/Cadence/extractfilegen.html Regards, Tim -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Austin Franklin Sent: Thursday, May 10, 2007 2:03 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Outputting "ASCII" from Allegro??? Hi, I've been asked to convert an Allegro .brd file into something that can be read in by a program called CAMCAD. I've been told that it'll take an "ASCII" output from Allegro, but I don't see any ASCII output capability from Allegro in either the "Save As" or the "Export" selections. Any suggestions? Regards, Austin ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------