[PCB_FORUM] Re: Gencad Output from Allegro
- From: "Shahed Safavi-Bayat" <shahed.bayat@xxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 4 Apr 2007 13:48:37 -0400
You can extract both Circuit CAM and "Fabmaster
eM Test Expert 2.0.4 and Fabmaster V8E4"
For latter there is a skill code by Cadence you can get it from them.
For Circuit CAM there are two extract script files one UNIX and Win. You can
google it and find it on web.
Regards,
Shahed
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Mitch S. Morey
Sent: Wednesday, April 04, 2007 1:37 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Gencad Output from Allegro
Hi Dave,
When you say Gencad format, what specifically does that address at
manufacturing? Gerbers? Drill files? X-Y locations? Is it like the PADS
ASCII output?
Just wondering. I've used allegro for a long time, and haven't had to put
out a "Gencad format" file before.
Good day.
Mitch
>
> We've been using Gencad format data for several of our manufacturing
> activities with our current toolset. We are now transitioning to Allegro,
> and I cannot find Gencad listed as an available output format.
>
> - Is Gencad output available directly from Allegro ?
> - Is there a public Allegro to Gencad conversion available (skill,
> extract, etc), and how do I obtain ?
> - Are there any recommendations for other suitable data formats (ODB++,
> etc) ?
>
> Thanks,
> Dave
-----------------------------------------
Stay ahead of the information curve.
Receive PCB news and jobs on your desktop daily.
Subscribe today to the PCB CafeNews newsletter.
[ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ]
It's informative and essential.
This message was sent to you from a machine at 192.35.156.11
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
