Jane,
That would work...I think. How do I run the extract?
If we could use this to report any parts with modified pins / padstacks,
then I could refresh everything except the modified one.
Does this sound feasable?
Thanks, Mark
Sawyer Jayne wrote:
We run an extract:
SYMBOL
SYM_NAME
DATES "LAST_MODIFIED
SYM_HAS_PIN_EDIT
SYM_TYPE
It reports if a symbol has been modified in the .brd.
Jayne
------------------------------------------------------------------------
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Wednesday, April 27, 2005 4:23 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Display pin numbers?
Hello Kevin,
From what I can tell...the Package Geometry/Pin numbers was added in 14.2. But if a board was designed prior to that (even though upreved to a newer version). Allegro uses the database library so that any mods to a component pin, etc...(design specific) would not automatically refresh to remove any mods. Now with a 13.5 file upreved to 15.1 through DB Doctor, pin numbers will not display unless I refresh all. But this would remove any mods made in the past. (Dangerous).
How can I use Allegro to uprev the design library without changing any mods, yet allow pin numbers to display?
As I mentioned, the "board" has been upreved by Allegro 15.1.
I know if I "refresh", Allegro will update any mods back to the default library version.
As Jean mentioned, if I extract...the symbols will overwrite any mods that were made.
We have tech's using the free viewer that would like to see pin numbers displayed on components, but will only work on boards that were designed in 14.2 or later without refreshing.
Thanks for the feedback! Mark
Kevin McCowan wrote:
If you need to uprev the symbols, why not extract them and use allegro to uprev them? Then you know they will still fit as they came from the design and refresh shouldn't cause any pain. I haven't noticed this problem before, though. Did they change something so that the pin numbers now show?
Kevin McCowan Sr. PCB Designer TSI Telsys
Mark Salberg wrote:
Sorry, I failed to mention that the .brd file has been upreved to 15.1. Mark
Mark Salberg wrote:
Is there a way to display pin numbers on a pre-14.2 .brd file WITHOUT refreshing all parts?
Package Geometry/Pin numbers
Since the board was originally created prior to 14.2, the only parts that display pin numbers are "new parts" that did NOT exist in the original board database library.
If we "refresh all" we would risk unwanted changes to modified components in the database.
However, my gut fell is that this is the only way to get them to display.
Thanks, Mark
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx <mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
with a subject of subscribe or unsubscribe
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx <mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx <mailto:icu-jobs-forum-subscribe@xxxxxxxxxx>
POST: icu-jobs-forum@xxxxxxxxxx <mailto:icu-jobs-forum@xxxxxxxxxx>
-----------------------------------------------------------
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx <mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
with a subject of subscribe or unsubscribe
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx <mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx <mailto:icu-jobs-forum-subscribe@xxxxxxxxxx>
POST: icu-jobs-forum@xxxxxxxxxx <mailto:icu-jobs-forum@xxxxxxxxxx>
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx <mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
with a subject of subscribe or unsubscribe
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx <mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx <mailto:icu-jobs-forum-subscribe@xxxxxxxxxx>
POST: icu-jobs-forum@xxxxxxxxxx <mailto:icu-jobs-forum@xxxxxxxxxx>
-----------------------------------------------------------
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
_____________________________________________________________________________ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com _____________________________________________________________________________