[PCB_FORUM] Re: ConceptHDL to Allegro parts placement
- From: "William Billereau" <william.billereau@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 20 Apr 2005 19:41:35 +0200
Hello Gary.
To make it working, you have to go in Setup of Project Manager, then on
Expansion tab, select Physical Layout.
I am not sure if you need to re-package (we use it for a long time.)
cfg_package is our default.
But It seems to be logical to package again.
It will probably create the cfg_package in worklib/project directory.
I hope it is all needed to do it working.
As far as i can remind, if the expansion is on vhdl_package, Concept-Allegro
interactivity won't work.
It works for place manually, show elements, move, delete...
William.
----- Original Message -----
From: Gary MacIndoe
To: Allegro Forum
Sent: Wednesday, April 20, 2005 7:21 PM
Subject: [PCB_FORUM] ConceptHDL to Allegro parts placement
Hey guys,
So I have the dual monitor thing going. I've heard that if you have both
Concept and Allegro open through Program Manager, you can select a component in
Concept, then place it in Allegro.
Does anybody know what's required for this to work? I have them both open,
but can't get it to work.
Allegro PCB Design 610 (Expert) - 15.2
Allegro Design Entry HDL 610 (Concept HDL Expert)
Windows XP Pro
Thanks for any help!
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
Other related posts:
