Of course you need to have forward annotated first. Then hiliting in allegro should hilite in concept and you should be able to place as described below.
Kevin McCowan Sr. PCB Designer TSI Telsys
-----------------------------------------------------------Hey Gary,
Have you tried:
Place>Manually.
Select the box next to Components by RefDes.
Click on a part in the Concept schematic, move cursor into the Allegro work area and the part should be attached to your cursor.
Make sure the component in Concept is highlighted before moving the cursor into the Allegro
workarea.
Gary MacIndoe wrote:
Hey guys,
So I have the dual monitor thing going. I've heard that if you have both Concept and Allegro open through Program Manager, you can select a component in Concept, then place it in Allegro.
Does anybody know what's required for this to work? I have them both open, but can't get it to work.
Allegro PCB Design 610 (Expert) - 15.2
Allegro Design Entry HDL 610 (Concept HDL Expert)
Windows XP Pro
Thanks for any help!
Gary E. MacIndoe PCB Design Engineer *A*dvanced *M*icro *D*evices, Inc. Longmont, Colorado
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------