You must open Concept and Allegro from the Project manager. Richard Weinberg Agere Systems 207-846-4539 -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Clymore Sent: Wednesday, April 20, 2005 1:38 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: ConceptHDL to Allegro parts placement Hey Gary, Have you tried: Place>Manually. Select the box next to Components by RefDes. Click on a part in the Concept schematic, move cursor into the Allegro work area and the part should be attached to your cursor. Make sure the component in Concept is highlighted before moving the cursor into the Allegro workarea. Gary MacIndoe wrote: > Hey guys, > > So I have the dual monitor thing going. I've heard that if you have > both Concept and Allegro open through Program Manager, you can select > a component in Concept, then place it in Allegro. > > Does anybody know what's required for this to work? I have them both > open, but can't get it to work. > > Allegro PCB Design 610 (Expert) - 15.2 > Allegro Design Entry HDL 610 (Concept HDL Expert) > Windows XP Pro > > Thanks for any help! > > Gary E. MacIndoe > PCB Design Engineer > *A*dvanced *M*icro *D*evices, Inc. > Longmont, Colorado > > -- Jim Clymore Manager/Design Engineer GHDsign USA Inc. 19800 MacArthur Blvd. Ste 520 Irvine, CA 92612 Phone: (949) 553-7789 Fax: (949) 553-7778 email: jlc@xxxxxxxxxxx ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------