[icon-discuss] Re: Lanyard
- From: Dan <dnkeys@xxxxxxxxxxxxx>
- To: icon-discuss@xxxxxxxxxxxxx
- Date: Wed, 26 Sep 2007 07:35:53 -0700
Hello,
This is what I did. But I must say, it is not easy to do and it might
take you many attempts.
1. Place the Icon on its front.
2. While holding the string end of the lanyard, squeeze it so that the
end of the loop is kind of pointed, with your fingers real close to the
leading edge.
3. Gently attempt to slide the leading edge of the string through either
the top or the back of the space between the little metal bar and the
case of the Icon. Note. If going through the back doesn't work, try the
top.
4. Keep trying it till it starts through.
5. Once it slides through, be careful not to pull it out.
6. Try to grab it with your fingers and pull it through.
7. Once you have the string through the opening, slide the actual
lanyard through the little loop and pull it tight. that's it.
This is really hard to do. It's also hard for sighted people to do as
well. My wife had lots of trouble connecting the lanyard also.
One other idea, perhaps a needle threader might work, I don't know. Just
a suggestion.
Dan
On Wed, 26 Sep 2007 09:17:21 -0500, stacey robinson wrote:
>HI John,
>I can't gt th end to go through that little hole.
>
>Stacey and GEB dog Chesley
>
>staceyr75@xxxxxxxxxxxxx
>----- Original Message -----
>From: "John Esak" <john@xxxxxxxxx>
>To: <icon-discuss@xxxxxxxxxxxxx>
>Sent: Wednesday, September 26, 2007 8:39 AM
>Subject: [icon-discuss] Re: Lanyard
>
>
>>I looked all over for my original box to find the lanyard so I could
>>maybe
>>give you an idea. But, no luck finding it yet.
>>
>>Just guessing though. You probably need to push the end with a loop on
>>it
>>through under the teeny-tiny bar at the top-back of the Icon far enough
>>that
>>you can then pass the other side of the lanyard through the loop and
>>pull
>>it
>>tight.
>>
>>Could be wrong... just guessing. HTH
>>
>>John
>>
>>>-----Original Message-----
>>>From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-
>>>bounce@xxxxxxxxxxxxx] On Behalf Of stacey robinson
>>>Sent: Wednesday, September 26, 2007 9:33 AM
>>>To: icon-discuss@xxxxxxxxxxxxx
>>>Subject: [icon-discuss] Lanyard
>>>
>>>Hi all,
>>>Can someone tell me how to attach the lanyard that came with the
>>>brailleplus
>>>to it?
>>>I'm not talking about th estrap for th case, but th elittle cloth like
>>>strap.
>>>Any hlp is appreciatd.
>>>Thanks
>>>
>>>Stacey and GEB dog Chesley
>>>
>>>staceyr75@xxxxxxxxxxxxx
>>
>>
>>
>>
>
>
Other related posts:
