[hsa] Re: 9mm reload - running into some brass even after sizing, the bullet is dropping half way into case.....

  • From: shane.fungafat@xxxxxxxxxxx
  • To: "'hsa@xxxxxxxxxxxxx'" <hsa@xxxxxxxxxxxxx>, "'hsa@xxxxxxxxxxxxx'" <hsa@xxxxxxxxxxxxx>
  • Date: Tue, 05 Mar 2019 07:40:40 -0700

Update... So I did some testing last night with 2 cases
 - Different headstamps (one S&B and one Winchester)
 - both cases, I CAREFULLY removed primer and resized - After
resizing, I tried placing bullet in case and would not fix as I
expected.  - I then belled the case with powder funnel - when I placed
bullet in base it was really loose and "dropped" into case.

I am thinking I have some brass that is WELL used from us 9mm open
folks. I was not even using these cases for my 9mm open, I was loading
regular 9mm... 
Shane

        -----------------------------------------From: "Keith G. Langer" 
To: hsa@xxxxxxxxxxxxx
Cc: hsa@xxxxxxxxxxxxx, hsa@xxxxxxxxxxxxx, hsa@xxxxxxxxxxxxx
Sent: Monday March 4 2019 8:47:08PM
Subject: [hsa] Re: 9mm reload - running into some brass even after
sizing, the bullet is dropping half way into case.....

 NT brass uses smaller primers, and screws up your reloading. It does
not affect case dimensions one iota. 

 KGL

 Subject: [hsa] Re: 9mm reload - running into some brass even after
sizing, the bullet is dropping half way into case.....
 Date: Tue, 5 Mar 2019 03:11:47 +0000 (UTC)

 Possible that Non Toxic (NT on head stamp) any different from
standard 9s?

 In a message dated 3/4/2019 7:47:38 PM Eastern Standard Time,
shane.fungafat@xxxxxxxxxxx writes:

 Peter, I did check the bullet diameter and it is definitely a problem
with the case

 -----------------------------------------
 From: "Peter Dougenik" 
 To: hsa@xxxxxxxxxxxxx
 Cc: 
 Sent: Monday March 4 2019 1:49:05PM
 Subject: [hsa] Re: 9mm reload - running into some brass even after
sizing, the bullet is dropping half way into case....

 Did you mic the bullets by any chance and make sure they are what
theyre supposed to be?

 On Mar 4, 2019, at 3:40 PM, Stewart Ginsberg  wrote:

 do you have a case pro?

 On Mon, Mar 4, 2019 at 1:48 PM  wrote:

 Anyone else running into brass where bullet is loose in case? I have
found about 4-7 9mm brass cases where the bullet is loose in the case
- I am finding them when I box them and eye ball the height of all of
the rounds in the box... What I am finding is the bullet is so loose
in the case that I can actually move the bullet with little to no
effort in the case.

 Wondering if a have a few well used 9mm MAJOR cases???!!!!

 Shane

 -- 

 Dr Stewart Ginsberg OD

 Natick Eye Associates
 1364 Worcester Rd
 Natick MA 01760
 508-655-8127

 ____________________________________________________________
 1 Cup Of This Tonight Will Melt Your Belly Fat
 mayserve-magestor.com

Other related posts: