[hsa] Re: 9mm reload - running into some brass even after sizing, the bullet is dropping half way into case.....

  • From: shane.fungafat@xxxxxxxxxxx
  • To: "'hsa@xxxxxxxxxxxxx'" <hsa@xxxxxxxxxxxxx>, "'hsa@xxxxxxxxxxxxx'" <hsa@xxxxxxxxxxxxx>
  • Date: Mon, 04 Mar 2019 17:46:24 -0700

Interesting - one of the guys on the Facebook reloading forum just
posted about the same issue... I am going to measure the OAL of the
brass and also run it though one of my other presses/die.... The
primer when it fine (was not loose)
It is just kind of weird that I am running into these now....
Shane

        -----------------------------------------From: "Tim"  (Redacted
sender "nov141992" for" 
To: hsa@xxxxxxxxxxxxx
Cc: 
Sent: Monday March 4 2019 4:48:29PM
Subject: [hsa] Re: 9mm reload - running into some brass even after
sizing, the bullet is dropping half way into case.....

   When I first started reloading, like 18 years ago, I had a problem
like this and it was because I didn't have enough crimp.     Another
thing to consider is an undersize reloading die.     Here's an
interesting article I found:  
[1]https://www.ssusa.org/articles/2017/7/27/reloading-tips-for-9-major/
[2]     Regards,     Tim       -----Original Message-----
 From: shane.fungafat 
 To: 'hsa@xxxxxxxxxxxxx' 
 Sent: Mon, Mar 4, 2019 1:48 pm
 Subject: [hsa] 9mm reload - running into some brass even after
sizing, the bullet is dropping half way into case.....

   Anyone else running into brass where bullet is loose in case? I
have found about 4-7 9mm brass cases where the bullet is loose in the
case - I am finding them when I box them and eye ball the height of
all of the rounds in the box... What I am finding is the bullet is so
loose in the case that I can actually move the bullet with little to
no effort in the case.  
   Wondering if a have a few well used 9mm MAJOR cases???!!!!   
   Shane   
      

Links:
------
[1]
https://www.ssusa.org/articles/2017/7/27/reloading-tips-for-9-major/
[2]
https://www.ssusa.org/articles/2017/7/27/reloading-tips-for-9-major/

Other related posts: