>>> 5. As I having problem with Haiku radeon driver and my dell with a >>> x300 >>> gcard I would like to save the output from kernel mode. Is that >>> saved if I >>> enabled the syslog file? >>> >> >> The output on the radeon driver is always written to the syslog file. >> However you probably need to capture it using the serial output if >> your display is not readable. What sort of problem are you having >> with the X300? > > I currently do not have Haiku/Zeta installed on my Dell Inspiron > (also an x300), but the problem I had with either Zeta's or Haiku's > driver is that Zeta would not boot at all with either of the two > drivers - it would hang after the last icon on the bootscreen. The > only way to get it to boot was to set a safemode lower resolution > (instead of its native 1280x800, which isn't supported by the > safemode options). > > Bernd sent me test Radeon drivers for well over a year to get it > fixed, but to no avail. Yes I have that one aswell I removed the radeonx driver and now I have vesa. With haiku's driver I can see a blue desktop on my 19" LCD before going in to kernel debuger land. :) so there are hope. this are the file I made last night. > > > Thom Holwerda > > MVH Fredrik Modéen