Doug, After you've saved your route you can open the route then open edit mode and rename, move, delete etc. any of the waypoints. You can walk forward and backward through the route with the W and cord W on the BT or and control w command on the QT. Gil At 08:26 PM 6/18/2004 -0400, you wrote: >Hi. While riding the bus and using the Braillenote >GPS, I have endeavored to create routes as I travel. I simply have pressed >space with k whenever the bus stops, and accepted the default names >"waypoint 1, 2," etc. I want to go in later, when I have more time and >edit the route, renaming the waypoints with nearest intersection >data. However, I can't get the software to follow the route in virtual >mode, setting my virtual position to successive waypoints, in order to get >the intersection data. Is there a way to set virtual position to >successive waypoints? Going thru the list of waypoints with w doesn't >change my virtual position. > >I suppose I could save each bus stop as a poi, and then successively set my >virtual position to each poi, and then create the route by setting >waypoints to each poi. Is this the only way to do what I want? Again, I >want to set virtual position to each successive waypoint, in order to glean >the intersection data to rename each waypoint. >Thanks, >Doug Martin >