[frgeek-michiana] Re: Freebox distros

  • From: Richard Zimmerman <richard@xxxxxxxxxxxx>
  • To: frgeek-michiana@xxxxxxxxxxxxx
  • Date: Fri, 06 May 2005 09:55:24 -0500

Since I'm a Debian guru I can take a look at these. I'm getting a lot of questions about MEPIS from a local PC users group. I will need a FGM Spec II machine though... My daughters is only a spec I box and the other FGM box I have is a 1g machine, not realistic for testing these.

Is there a class tomorrow on the 7th? I'd like to sit in and look at the new class stuff they are doing so I know how to config the LTSP server. I finally have all that straightened out on the home lab.

Goose

Tom Brown wrote:

Take a look at them if you have time. Install them on a FreeBox2 spec machine and report findings to FreeGeek Michiana <frgeek-michiana@xxxxxxxxxxxxx>.

Tom


At 01:03 PM 5/5/05 -0500, you wrote:

I read this on a board:



MTHedded

Mar 21 2005, 03:07 PM

In my computer recycling group, we've been trying practically every distro out there to see what works best. The machines donated to the group range from the naturally old, slow systems with little or no horsepower to them, to some that are fairly decent newer PC's.

We've found some that work pretty well, three in particular, that we're pretty well stuck on now. All 3 are Debian based. BeatriX for our oldest machines, Ubuntu for the midlle-of-the-road PCs, and Mepis for the higher-end stuff. We've even discovered that there are a lot of winmodems that work great under this system.

Has anyone else tried these 3 distros, especially MEPIS? What kind of luck are you having? And finally, does anyone have a more complete list of winmodems that they know will work under MEPIS? The list on the Mepis website and in their forums is less than helpful, as we've only found 4 winmodems in their lists, but know of quite a few that actually work fine and just aren't documented.

We're even considering purchasing large lots of two or three different winmodems to put into the systems we reuse/refurbish, so that we have a standard base to work from. So far, we're all pretty impressed by both Mepis and BeatriX, how easy it is to install (one new volunteer with very little experience managed to PROPERLY install BOTH the new SimplyMepis and BeatriX WITHOUT ANY HELP!!!) Our jaws were just dropping!

And nearly everything is usable, even by n00bz , without little or no learning curve. Is anyone else having this sort of luck with these distros?



I tried the Beatrix but it has a bug in the install procedure, and I stopped with that one for now.

The I read about morphix (morphix.org). That one has a lightgui with xfce that looks good. I’ll get back to you when I see how it handles sound cards.



Rick






To post to the list send email to <frgeek-michiana@xxxxxxxxxxxxxx>

You may unsubscribe or change your list settings by going to the list website at <//www.freelists.org/webpage/frgeek-michiana>



--
Richard "Goose" Zimmerman
Safety Assistant / IT Guru
K&B Transport, Inc. - Elkhart, IN
(574) 389-1986 (574) 389-8527 Fax
(800) 548-2718 (574) 850-5764 Cell




To post to the list send email to <frgeek-michiana@xxxxxxxxxxxxxx>

You may unsubscribe or change your list settings by going to the list website at 
<//www.freelists.org/webpage/frgeek-michiana>

Other related posts: