Re: [foxboro] The fun never ends - SysDef print report
- From: "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 21 Feb 2014 13:06:44 -0800
Philip,
I tried that and the reports are blank/empty. I am at a loss for an
explanation except maybe...
There is a fifth dimension beyond that which is known to man. It is a
dimension as vast as space and as timeless as infinity. It is the middle
ground between light and shadow, between science and superstition, and it
lies between the pit of man's fears and the summit of his knowledge. This is
the dimension of imagination. It is an area which we call the Twilight Zone.
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Pulas, Philip
Sent: Friday, February 21, 2014 9:41 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] The fun never ends - SysDef print report
Joe,
I never tried reports or printing in SysDef before, but wanted to check it
out. I found that the Utility Reports are not that useful, as they just
list what is possible and not what is configured. However, if I go to Print
Preview when I have Parameter Definition open, I think it shows the listing
you are looking for. The same goes for Software Definition. You don't need
to actually run a report to get the info. Try that and see if it matches
the old versions of reports you have.
Thanks,
Philip Pulas
Lead Engineer, Process Systems
Tesoro Golden Eagle Refinery
Ph: (925) 372-3043
Email: philip.g.pulas@xxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joe Riccardi
Sent: Thursday, February 20, 2014 7:27 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] The fun never ends - SysDef print report
I get all those details plus in a report on my other projects; who hosts
what/who, sysmon, software pkgs for each host, etc. Everything I see on the
displays. Where did I get them from? I can send a copy off list, I checked
them earlier for clues before I read the manual. Nothing in the manual...
Is this a dream...
Sent from my iPhone
> On Feb 20, 2014, at 7:04 PM, "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx>
wrote:
>
> Two reports work.
> Component Summary which list the QTY of the different Stations, FBM,s
> and peripherals in your config Letterbug report works also...but that
> is useless info...just how many times an individual letterbug is used
>
> Other reports just list everything possible as you have stated earlier
>
> What is it you are trying to see.....as the most important things in a
> sysdef...like logical names, hosting, interconnections....would not be
> shown in any available report
>
> ______________________________________________________________________
> _______________
>
> Russ Boulay | Schneider Electric | Invensys | United States | Support
> Engineering Manager
> Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
> Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address:
> 2000 Crow Canyon Place Suite 170, 94583 San Ramon, California, United
> States
>
> *** Please consider the environment before printing this e-mail
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Joseph M. Riccardi
> Sent: Thursday, February 20, 2014 6:23 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] The fun never ends - SysDef print report
>
> Then how do I get a report on my system definition? I have done it many
times before to review the configuration and if I need to change something?
>
>
> Joseph M. Riccardi
> 386-441-0250 Office
> 386-451-7607 Cell
>
> Joe@xxxxxxxxxxxxx
>
> "To give real service you must add something that cannot be bought or
> measured with money; and that is sincerity and integrity." - Donald A.
> Adams
>
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Boulay, Russ
> Sent: Thursday, February 20, 2014 6:03 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] The fun never ends - SysDef print report
>
> Same on my sysdef's...just checked...cant say I have ever used the utility
reports in all these years...
> No cases entered complaining either....no one probably ever uses it.....
>
> Not that it matters, but sometimes the path is wrong when you look at the
utility menu....but that didn't matter on my test either.
>
> ______________________________________________________________________
> ______
> _________
>
> Russ Boulay | Schneider Electric | Invensys | United States | Support
> Engineering Manager
> Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
> Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address:
> 2000 Crow Canyon Place Suite 170, 94583 San Ramon, California, United
> States
>
> *** Please consider the environment before printing this e-mail
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Joseph M. Riccardi
> Sent: Thursday, February 20, 2014 5:35 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] The fun never ends - SysDef print report
>
> Folks,
> I installed SysDef (V2.Xs & V3.0, same problem with all versions), I open
the *cfg files (we have a number of different dated.cfg files from years
past, same problem with all files), it has to be updated/converted, I view
Parameter Definition, I see all of my
Letterbugs/Pkgs/Descriptions/Parameters/Values, I select
Options/Utilities/Utilities Reports, no matter what report I select and run
all I get are the default listing, not what I see on the screen?
>
> Now I have not edited and/or run SysDef reports in probably 6-7 years but
it cannot be this difficult. What am I missing?
>
>
> Joseph M. Riccardi
> 386-441-0250 Office
> 386-451-7607 Cell
>
> Joe@xxxxxxxxxxxxx
>
> "To give real service you must add something that cannot be bought or
> measured with money; and that is sincerity and integrity." - Donald A.
> Adams
>
>
>
>
>
>
>
> ______________________________________________________________________
> _ This mailing list is neither sponsored nor endorsed by Invensys
> Process Systems (formerly The Foxboro Company). Use the info you
> obtain here at your own risks. Read
> http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person. This email comes
from a division of the Invensys Group, owned by Invensys plc, which is a
company registered in England and Wales with its registered office at 3rd
Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
a list of European legal entities within the Invensys Group, please select
the Legal Entities link at invensys.com. Invensys PLC is owned by the
Schneider-Electric Group.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
subject to the terms of any agreements between Invensys (and/or its
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
affiliates).
>
>
>
>
> ______________________________________________________________________
> _ This mailing list is neither sponsored nor endorsed by Invensys
> Process Systems (formerly The Foxboro Company). Use the info you
> obtain here at your own risks. Read
> http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
>
> ______________________________________________________________________
> _ This mailing list is neither sponsored nor endorsed by Invensys
> Process Systems (formerly The Foxboro Company). Use the info you
> obtain here at your own risks. Read
> http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person. This email comes
from a division of the Invensys Group, owned by Invensys plc, which is a
company registered in England and Wales with its registered office at 3rd
Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
a list of European legal entities within the Invensys Group, please select
the Legal Entities link at invensys.com. Invensys PLC is owned by the
Schneider-Electric Group.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
subject to the terms of any agreements between Invensys (and/or its
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
affiliates).
>
>
>
>
> ______________________________________________________________________
> _ This mailing list is neither sponsored nor endorsed by Invensys
> Process Systems (formerly The Foxboro Company). Use the info you
> obtain here at your own risks. Read
> http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
