Re: [foxboro] The fun never ends - SysDef print report
- From: "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 20 Feb 2014 22:04:40 -0500
Two reports work.
Component Summary which list the QTY of the different Stations, FBM,s and
peripherals in your config
Letterbug report works also...but that is useless info...just how many times an
individual letterbug is used
Other reports just list everything possible as you have stated earlier
What is it you are trying to see.....as the most important things in a
sysdef...like logical names, hosting, interconnections....would not be shown in
any available report
_____________________________________________________________________________________
Russ Boulay | Schneider Electric | Invensys | United States | Support
Engineering Manager
Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000 Crow
Canyon Place Suite 170, 94583 San Ramon, California, United States
*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Thursday, February 20, 2014 6:23 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] The fun never ends - SysDef print report
Then how do I get a report on my system definition? I have done it many times
before to review the configuration and if I need to change something?
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or measured
with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Thursday, February 20, 2014 6:03 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] The fun never ends - SysDef print report
Same on my sysdef's...just checked...cant say I have ever used the utility
reports in all these years...
No cases entered complaining either....no one probably ever uses it.....
Not that it matters, but sometimes the path is wrong when you look at the
utility menu....but that didn't matter on my test either.
____________________________________________________________________________
_________
Russ Boulay | Schneider Electric | Invensys | United States | Support
Engineering Manager
Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000 Crow
Canyon Place Suite 170, 94583 San Ramon, California, United States
*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Thursday, February 20, 2014 5:35 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] The fun never ends - SysDef print report
Folks,
I installed SysDef (V2.Xs & V3.0, same problem with all versions), I open the
*cfg files (we have a number of different dated.cfg files from years past, same
problem with all files), it has to be updated/converted, I view Parameter
Definition, I see all of my Letterbugs/Pkgs/Descriptions/Parameters/Values, I
select Options/Utilities/Utilities Reports, no matter what report I select and
run all I get are the default listing, not what I see on the screen?
Now I have not edited and/or run SysDef reports in probably 6-7 years but it
cannot be this difficult. What am I missing?
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or measured
with money; and that is sincerity and integrity." - Donald A. Adams
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please select the Legal Entities link at invensys.com.
Invensys PLC is owned by the Schneider-Electric Group.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please select the Legal Entities link at invensys.com.
Invensys PLC is owned by the Schneider-Electric Group.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
