Re: [foxboro] The fun never ends - SysDef print report
- From: Joe Riccardi <joe@xxxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 20 Feb 2014 19:26:33 -0800
I get all those details plus in a report on my other projects; who hosts
what/who, sysmon, software pkgs for each host, etc. Everything I see on the
displays. Where did I get them from? I can send a copy off list, I checked them
earlier for clues before I read the manual. Nothing in the manual...
Is this a dream...
Sent from my iPhone
> On Feb 20, 2014, at 7:04 PM, "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx> wrote:
>
> Two reports work.
> Component Summary which list the QTY of the different Stations, FBM,s and
> peripherals in your config
> Letterbug report works also...but that is useless info...just how many times
> an individual letterbug is used
>
> Other reports just list everything possible as you have stated earlier
>
> What is it you are trying to see.....as the most important things in a
> sysdef...like logical names, hosting, interconnections....would not be shown
> in any available report
>
> _____________________________________________________________________________________
>
> Russ Boulay | Schneider Electric | Invensys | United States | Support
> Engineering Manager
> Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
> Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000 Crow
> Canyon Place Suite 170, 94583 San Ramon, California, United States
>
> *** Please consider the environment before printing this e-mail
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
> Behalf Of Joseph M. Riccardi
> Sent: Thursday, February 20, 2014 6:23 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] The fun never ends - SysDef print report
>
> Then how do I get a report on my system definition? I have done it many
> times before to review the configuration and if I need to change something?
>
>
> Joseph M. Riccardi
> 386-441-0250 Office
> 386-451-7607 Cell
>
> Joe@xxxxxxxxxxxxx
>
> "To give real service you must add something that cannot be bought or
> measured with money; and that is sincerity and integrity." - Donald A. Adams
>
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
> Behalf Of Boulay, Russ
> Sent: Thursday, February 20, 2014 6:03 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] The fun never ends - SysDef print report
>
> Same on my sysdef's...just checked...cant say I have ever used the utility
> reports in all these years...
> No cases entered complaining either....no one probably ever uses it.....
>
> Not that it matters, but sometimes the path is wrong when you look at the
> utility menu....but that didn't matter on my test either.
>
> ____________________________________________________________________________
> _________
>
> Russ Boulay | Schneider Electric | Invensys | United States | Support
> Engineering Manager
> Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
> Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000 Crow
> Canyon Place Suite 170, 94583 San Ramon, California, United States
>
> *** Please consider the environment before printing this e-mail
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
> Behalf Of Joseph M. Riccardi
> Sent: Thursday, February 20, 2014 5:35 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] The fun never ends - SysDef print report
>
> Folks,
> I installed SysDef (V2.Xs & V3.0, same problem with all versions), I open the
> *cfg files (we have a number of different dated.cfg files from years past,
> same problem with all files), it has to be updated/converted, I view
> Parameter Definition, I see all of my
> Letterbugs/Pkgs/Descriptions/Parameters/Values, I select
> Options/Utilities/Utilities Reports, no matter what report I select and run
> all I get are the default listing, not what I see on the screen?
>
> Now I have not edited and/or run SysDef reports in probably 6-7 years but it
> cannot be this difficult. What am I missing?
>
>
> Joseph M. Riccardi
> 386-441-0250 Office
> 386-451-7607 Cell
>
> Joe@xxxxxxxxxxxxx
>
> "To give real service you must add something that cannot be bought or
> measured with money; and that is sincerity and integrity." - Donald A. Adams
>
>
>
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at your
> own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or attached
> files, is intended solely for the individual or entity to which it is
> addressed. This e-mail is confidential and may well also be legally
> privileged. If you have received it in error, you are on notice of its
> status. Please notify the sender immediately by reply e-mail and then delete
> this message from your system. Please do not copy it or use it for any
> purposes, or disclose its contents to any other person. This email comes from
> a division of the Invensys Group, owned by Invensys plc, which is a company
> registered in England and Wales with its registered office at 3rd Floor, 40
> Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of
> European legal entities within the Invensys Group, please select the Legal
> Entities link at invensys.com. Invensys PLC is owned by the
> Schneider-Electric Group.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
> reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
> subject to the terms of any agreements between Invensys (and/or its
> subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
> affiliates).
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at your
> own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at your
> own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or attached
> files, is intended solely for the individual or entity to which it is
> addressed. This e-mail is confidential and may well also be legally
> privileged. If you have received it in error, you are on notice of its
> status. Please notify the sender immediately by reply e-mail and then delete
> this message from your system. Please do not copy it or use it for any
> purposes, or disclose its contents to any other person. This email comes from
> a division of the Invensys Group, owned by Invensys plc, which is a company
> registered in England and Wales with its registered office at 3rd Floor, 40
> Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of
> European legal entities within the Invensys Group, please select the Legal
> Entities link at invensys.com. Invensys PLC is owned by the
> Schneider-Electric Group.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
> reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
> subject to the terms of any agreements between Invensys (and/or its
> subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
> affiliates).
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
