Ok, I need to find one of these I/A block books; where should I start looking? This would be highly helpfull! Thanks for the info and help everyone! Steve On 12/29/06, Jeremy Milum <jmilum@xxxxxxxxx> wrote: > > On 12/29/06, Stephen Ziegler <stephen.m.ziegler@xxxxxxxxx> wrote: > > that the GDEV has a symbol related with it? The DCM > > is just a block with configurable inputs for a myriad of things; I am > > assuming the GDEV is probably the same. > > there are no 'symbols' internally defined for in an I/A system. Your > best bet would be to try and follow the ISA guidelines or any that > have already been defined by your company. > > But you are right, it is just a block with many inputs, outputs, and > configurable parameters to do many things. > > The I/A Block Book will become your best friend ;) > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave