Re: [foxboro] McAfee 8.0i No more updates

  • From: "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx>
  • To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
  • Date: Thu, 15 Apr 2010 13:06:42 -0400

Invensys has supplied over the years many McAfee versions.
Most common were V7.11, V8.0i, V8.5i, V8.7i

V7.11 and V8.0i will not support V2 DAT files.
V8.5i and V8.7i will.

V8.7i ships with I/A V8.5

Workstations shipped in the last 3 years have had V7.11, V8.0i and V8.5i on 
them as zip files as you needed to load the McAfee version that would support 
the I/A version you were running.

So users running the first two versions....will have to upgrade to V8.5i or 
V8.7i to be able to use the V2 DAT's

Advisory from Invensys is due out in the next few days... as we were developing 
a plan for users to upgrade.
Those details will be in the advisory.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Lowell, Timothy
Sent: Thursday, April 15, 2010 12:59 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] McAfee 8.0i No more updates

Thanks, Jack.  That is a surprise to me.

Here is a link to the Knowledge Base article from McAfee:

https://kc.mcafee.com/corporate/index?page=content&id=KB52201

The V1 DAT files stopped being supported on 3/31/10.  It would have been nice 
for Invensys to let us know before it happened.  One of our sites is upgrading 
to 8.5 in July, which uses the new V2 DAT files in its version of McAfee, but 
the other two I/A sites have no immediate plans to upgrade.  Invensys folks, 
are you working on supporting the V2 DAT files on I/A for versions below 8.5?

Tim Lowell
Tesoro Refining and Marketing Company
19100 Ridgewood Parkway
San Antonio, TX 78259
210-626-4929 (w)
210-253-0225 (c)
timothy.lowell@xxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Jack.Easley@xxxxxxxxxxxx
Sent: Thursday, April 15, 2010 11:41 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] McAfee 8.0i No more updates

I don't know how many folks out there update their Antivirus definitions
routinely on Foxboro boxes, but I just discovered that our Foxboro 8.4.2
systems with McAfee Virus Scan Enterprise 8.0i will no longer take
update definitions (even though it says it does). Foxboro was still
selling and installing boxes with McAfee 8.0i two years ago.
 

Supposedly there is to be a notification to all registered Foxboro
customers, but I haven't seen one yet. Just passing this on so it won't
catch some of you by surprise, as it did me.

Jack Easley
Sr. I&C Technician
Luminant Power, Martin Lake Plant
Phone 903.836.6273
jack.easley@xxxxxxxxxxxx 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys plc, which is a company registered in England and 
Wales with its registered office at Portland House, Bressenden Place, London, 
SW1E 5BF (Registered number 166023). For a list of European legal entities 
within the Invensys Group, please go to 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. 
You may contact Invensys plc on +44 (0)20 7821 3848 or e-mail 
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be 
subject to the terms of any agreements between Invensys (and/or its 
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and 
affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: