I am curious, what functionality do these drivers lack that you need? > -----Original Message----- > From: Stan Brown [mailto:stanb@xxxxxxxxx] On Behalf Of Kevin > Fitzgerrell > Sent: Thursday, April 29, 2010 6:43 AM > To: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] FBM232 and Allen Bradley PLC-5/40E with FDSI > Ethernet/Ip > > Which docs are those - Foxboro or AB - that say you can use EthernetIP > to > PLC5? My understanding is that Foxboro had implemented a fairly > limited CIP > (EthernetIP) driver that works with ControlLogix but not PLC5. They > have a > separate Ethernet driver for PLC5s, using CSP but it is also quite > limited. > Neither driver appears to be a good fit at my plant. > Cheers, > > Kevin FitzGerrell > > On Thu, Apr 29, 2010 at 7:16 PM, <jrmcleish63@xxxxxxxxxxxxxxx> wrote: > > > Donato, > > > > I'm like Jack and no expert but the documentation does say that you > can > > talk EthernetIP to PLC5E. Most of our PLC's are used to scan > devicenet > > rather than IO so we have been replacing these with FBM232 Anybus > > combination. This works well if you only have devicenet. We chose not > to > > risk the ethernetIP since we only had a couple of PLC5E's and went to > FBM230 > > with serial which have proven to be reliable but need a lot of work > to get > > your scanning in the right order. Basically once you have arranged > your data > > into contiguous blocks by moving them to block transfer reads/writes > then > > you can pull a lot of data across the link. If you get them wrong > comms can > > be very very slow... > > > > cheers, Rob. > > > > > > > > > Donato Azevedo <donatoaz@xxxxxxxxx> wrote: > > > > > > Bothering you gents once again: > > > > > > I have given up the idea of having one single FBM to communicate > with > > > multiple devices (the idea of having more than one driver image). > > > > > > I would like to know if I can interface the FBM232 to an A-B PLC- > 5/40E > > > using the Ethernet/IP driver. > > > > > > The PSS says it can interface ControlLogix controllers, but it does > > > not say whether it supports the PLC-5 Ethernet series or not. > > > > > > Regards, > > > -- > > > Donato Azevedo > > > > > > > > > > _______________________________________________________________________ > > > This mailing list is neither sponsored nor endorsed by Invensys > Process > > > Systems (formerly The Foxboro Company). Use the info you obtain > here at > > > your own risks. Read > http://www.thecassandraproject.org/disclaimer.html > > > > > > foxboro mailing list: > //www.freelists.org/list/foxboro > > > to subscribe: mailto:foxboro- > request@xxxxxxxxxxxxx?subject=join > > > to unsubscribe: mailto:foxboro- > request@xxxxxxxxxxxxx?subject=leave > > > > > > > > > > _______________________________________________________________________ > > This mailing list is neither sponsored nor endorsed by Invensys > Process > > Systems (formerly The Foxboro Company). Use the info you obtain here > at > > your own risks. Read > http://www.thecassandraproject.org/disclaimer.html > > > > foxboro mailing list: > //www.freelists.org/list/foxboro > > to subscribe: mailto:foxboro- > request@xxxxxxxxxxxxx?subject=join > > to unsubscribe: mailto:foxboro- > request@xxxxxxxxxxxxx?subject=leave > > > > > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > The information contained in this message and any attached files may be privileged and/or confidential and protected from disclosure. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please so notify the sender immediately without reading it. Also, please promptly destroy the original transmission and its attachments. Any views or opinions presented in this message or attachments are those of the author and do not necessarily represent those of KapStone Paper and Packaging Corporation or its subsidiaries. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave