Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem
- From: "Brown, Stanley" <stan.brown@xxxxxxxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 13 Apr 2010 13:05:56 -0400
Sometimes I forget to check the simple things, when I think is something
complex that I do not fully understand.
> -----Original Message-----
> From: Stan Brown [mailto:stanb@xxxxxxxxx] On Behalf Of
> Jack.Easley@xxxxxxxxxxxx
> Sent: Tuesday, April 13, 2010 12:59 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix)
> Install Problem
>
> Whoops, back to basics. I found the problem to be base-plate switch
> settings.
>
> I appreciate everyone's assistance.
>
> Jack Easley
> Sr. I&C Technician
> Luminant Power, Martin Lake Plant
> Phone 903.836.6273
> jack.easley@xxxxxxxxxxxx
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-
> bounce@xxxxxxxxxxxxx]
> On Behalf Of McKinney, Mark
> Sent: Tuesday, April 13, 2010 10:17 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix)
> Install Problem
>
> As you probably already know the "Soft_Download" should simply load the
> driver which resides in /usr/fox/sp/files/devices/*.ZIPH into the
> FBM232. Can you see this file in this directory? When it does load you
> should see the following messages in the sys_mon log file after you
> perform a soft_download and a DB_Download:
>
> 2010-04-13 11:02:35 01XXCP Equip = 01XX03 SYSMON -00068 Single PIO Bus
> Access Error on A
> 2010-04-13 11:02:35 01XXCP Equip = 01XX03 SYSMON -00123 Comm Device
> Failed
> 2010-04-13 11:02:43 01XXCP Equip = 01XX03/01CLX1 SYSMON -00123 Comm
> Device Failed
> 2010-04-13 11:04:13 01XXCP Equip = 01XX03 SYSMON -00070 Single PIO Bus
> Access Recovery on A
> 2010-04-13 11:04:51 01XXCP Equip = 01XX03 SYSMON -00121 Device on scan
> 2010-04-13 11:04:56 01XXCP Equip = 01XX03/01CLX1 SYSMON -00121 Device
> on
> scan
>
> This is on a machine running IA 8.4.3
>
> Mark McKinney
> Electrical Engineer
> PREMIER System Integrators, Inc.
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-
> bounce@xxxxxxxxxxxxx]
> On Behalf Of Jack.Easley@xxxxxxxxxxxx
> Sent: Tuesday, April 13, 2010 9:55 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix)
> Install Problem
>
> No, this is not our issue as the second pick is available, just nothing
> happens. There is no message to indicate any action on the top line of
> SysMon, nor does the FBM232 reboot (go blue), etc.
>
> Jack Easley
> Sr. I&C Technician
> Luminant Power, Martin Lake Plant
> Phone 903.836.6273
> jack.easley@xxxxxxxxxxxx
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-
> bounce@xxxxxxxxxxxxx]
> On Behalf Of McKinney, Mark
> Sent: Tuesday, April 13, 2010 9:51 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix)
> Install Problem
>
> When you pick the "Soft Download" pick from system manager does the
> second pick not contain "Soft Download" as an option? I have seen this
> happen when the name of the ECB200 does not coincide with the slot
> position of the FBM232 (i.e. XXXX03 when card is physically in slot 4
> and should be named XXXX04).
>
> Mark McKinney
> Electrical Engineer
> PREMIER System Integrators, Inc.
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-
> bounce@xxxxxxxxxxxxx]
> On Behalf Of Jack.Easley@xxxxxxxxxxxx
> Sent: Tuesday, April 13, 2010 9:40 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix)
> Install Problem
>
> We are having issues with a new install of an FBM232 Allen-Bradley
> Ethernet FDSI at Foxboro Version 8.4.2 and FDSI Configurator Version
> 1.2. I've already found the known conflict issue with 8.4.2 and FDSI
> Configurator 1.2 and am trying to get FDSI Configurator 1.3 from Fox
> Service. However I suspect further issues as I cannot do a soft-
> download
> to the already created ECBs, which I don't think involves the files
> created by the FDSI Configurator. Any one else out there with 8.4.2
> issues with this Ethernet FDSI install, hopefully with resolution?
>
>
> Jack Easley
> Sr. I&C Technician
> Luminant Power, Martin Lake Plant
> Phone 903.836.6273
> jack.easley@xxxxxxxxxxxx
>
> Confidentiality Notice:
>
> The information contained in this message is private and confidential.
> This information is intended only for the individual or entity named
> above. If the reader of this message is not the intended recipient,
> you
> are hereby notified that any use, review, dissemination, distribution,
> copying or action taken based on this message or its attachments, if
> any, is strictly prohibited. If you are not the intended recipient,
> please contact the sender by reply email and delete or destroy all
> copies of this message and any attachments. Thank you.
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> Confidentiality Notice: This email message, including any attachments,
> contains or may contain confidential information intended only for the
> addressee. If you are not an intended recipient of this message, be
> advised that any reading, dissemination, forwarding, printing, copying
> or other use of this message or its attachments is strictly prohibited.
> If
> you have received this message in error, please notify the sender
> immediately by reply message and delete this email message and any
> attachments from your system.
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
The information contained in this message and any attached files may be
privileged and/or confidential and protected from disclosure. If you are not
the intended recipient, any disclosure, copying, distribution or use of any of
the information contained in or attached to this transmission is strictly
prohibited. If you have received this transmission in error, please so notify
the sender immediately without reading it. Also, please promptly destroy the
original transmission and its attachments. Any views or opinions presented in
this message or attachments are those of the author and do not necessarily
represent those of KapStone Paper and Packaging Corporation or its subsidiaries.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
