Whoops, back to basics. I found the problem to be base-plate switch settings. I appreciate everyone's assistance. Jack Easley Sr. I&C Technician Luminant Power, Martin Lake Plant Phone 903.836.6273 jack.easley@xxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of McKinney, Mark Sent: Tuesday, April 13, 2010 10:17 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem As you probably already know the "Soft_Download" should simply load the driver which resides in /usr/fox/sp/files/devices/*.ZIPH into the FBM232. Can you see this file in this directory? When it does load you should see the following messages in the sys_mon log file after you perform a soft_download and a DB_Download: 2010-04-13 11:02:35 01XXCP Equip = 01XX03 SYSMON -00068 Single PIO Bus Access Error on A 2010-04-13 11:02:35 01XXCP Equip = 01XX03 SYSMON -00123 Comm Device Failed 2010-04-13 11:02:43 01XXCP Equip = 01XX03/01CLX1 SYSMON -00123 Comm Device Failed 2010-04-13 11:04:13 01XXCP Equip = 01XX03 SYSMON -00070 Single PIO Bus Access Recovery on A 2010-04-13 11:04:51 01XXCP Equip = 01XX03 SYSMON -00121 Device on scan 2010-04-13 11:04:56 01XXCP Equip = 01XX03/01CLX1 SYSMON -00121 Device on scan This is on a machine running IA 8.4.3 Mark McKinney Electrical Engineer PREMIER System Integrators, Inc. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jack.Easley@xxxxxxxxxxxx Sent: Tuesday, April 13, 2010 9:55 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem No, this is not our issue as the second pick is available, just nothing happens. There is no message to indicate any action on the top line of SysMon, nor does the FBM232 reboot (go blue), etc. Jack Easley Sr. I&C Technician Luminant Power, Martin Lake Plant Phone 903.836.6273 jack.easley@xxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of McKinney, Mark Sent: Tuesday, April 13, 2010 9:51 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem When you pick the "Soft Download" pick from system manager does the second pick not contain "Soft Download" as an option? I have seen this happen when the name of the ECB200 does not coincide with the slot position of the FBM232 (i.e. XXXX03 when card is physically in slot 4 and should be named XXXX04). Mark McKinney Electrical Engineer PREMIER System Integrators, Inc. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jack.Easley@xxxxxxxxxxxx Sent: Tuesday, April 13, 2010 9:40 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem We are having issues with a new install of an FBM232 Allen-Bradley Ethernet FDSI at Foxboro Version 8.4.2 and FDSI Configurator Version 1.2. I've already found the known conflict issue with 8.4.2 and FDSI Configurator 1.2 and am trying to get FDSI Configurator 1.3 from Fox Service. However I suspect further issues as I cannot do a soft-download to the already created ECBs, which I don't think involves the files created by the FDSI Configurator. Any one else out there with 8.4.2 issues with this Ethernet FDSI install, hopefully with resolution? Jack Easley Sr. I&C Technician Luminant Power, Martin Lake Plant Phone 903.836.6273 jack.easley@xxxxxxxxxxxx Confidentiality Notice: The information contained in this message is private and confidential. This information is intended only for the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any use, review, dissemination, distribution, copying or action taken based on this message or its attachments, if any, is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and delete or destroy all copies of this message and any attachments. Thank you. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave Confidentiality Notice: This email message, including any attachments, contains or may contain confidential information intended only for the addressee. If you are not an intended recipient of this message, be advised that any reading, dissemination, forwarding, printing, copying or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply message and delete this email message and any attachments from your system. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave