Sounds like you had similar initial symptoms, but I have tried Reset with no results also. I have tried the same route you went of just editing the .XML file but we are still stuck with a Red-Dead FBM232 (actually I just copied one with the same IP addresses from another Unit and renamed it). I also noticed there is also a .lmx file associated with each .XML file, which is not just text. I also copied this .lmx from the other Unit and edited it with VI to change the ECB name I could see, (where's bpatch when you need it?) Since this trick didn't work to workaround the FDSI config problem, I suspect I have a second problem. I have installed the Ethernet FDSI software (this is the first Ethernet FDSI on this AW). Jack Easley Sr. I&C Technician Luminant Power, Martin Lake Plant Phone 903.836.6273 jack.easley@xxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Targosky, Richard S. Sent: Tuesday, April 13, 2010 9:54 AM To: 'foxboro@xxxxxxxxxxxxx' Subject: Re: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem We are using control-logix and IA v8.4.1 -- so problems might be a bit different. BUT - we found that doing an FBM RESET from the system monitor helped out when adding a child ECB. Before hitting RESET we tried to soft D/L the FBM as well as db download. The child ECB stayed dead. If you can - I would try a RESET - but of course you will loose communications to the PLCs until you are back again. Also - regarding thg FDSI Config GUI - we have the new version - it is nice (it WORKS). But when we had the old version - simply editing the xml with notepad worked fine. Rick Targosky PPG Industries. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jack.Easley@xxxxxxxxxxxx Sent: Tuesday, April 13, 2010 10:40 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Allen-Bradley Ethernet FDSI (not Control-Logix) Install Problem We are having issues with a new install of an FBM232 Allen-Bradley Ethernet FDSI at Foxboro Version 8.4.2 and FDSI Configurator Version 1.2. I've already found the known conflict issue with 8.4.2 and FDSI Configurator 1.2 and am trying to get FDSI Configurator 1.3 from Fox Service. However I suspect further issues as I cannot do a soft-download to the already created ECBs, which I don't think involves the files created by the FDSI Configurator. Any one else out there with 8.4.2 issues with this Ethernet FDSI install, hopefully with resolution? Jack Easley Sr. I&C Technician Luminant Power, Martin Lake Plant Phone 903.836.6273 jack.easley@xxxxxxxxxxxx Confidentiality Notice: This email message, including any attachments, contains or may contain confidential information intended only for the addressee. If you are not an intended recipient of this message, be advised that any reading, dissemination, forwarding, printing, copying or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply message and delete this email message and any attachments from your system. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave Confidentiality Notice: This email message, including any attachments, contains or may contain confidential information intended only for the addressee. If you are not an intended recipient of this message, be advised that any reading, dissemination, forwarding, printing, copying or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply message and delete this email message and any attachments from your system. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave