List, I am looking for suggestions on how to monitor all those system counters that exist under the PERF tab on the System Management display. There are a lot of counters there. More than you can routinely check on. I was wondering if anyone had any tools or way to access these values and then generate some kind of notification when one of them went out of wack. We had a problem last year that was warned of by an increase in MAC resets but nobody looked at this until the problem was upon us. Knowing that this was increasing would have given us time to deal with it before it rose to the level that plant operators saw a problem. > Nick Steinbrecher > Process Control Engineer > (908)-474-3565 > email E.STEINBRECHER@xxxxxxxxxxxx > > > This note may contain Infineum confidential information. If you are > an unintended recipient; (i) place no reliance on the information > contained herein; (ii) do not disclose, distribute, or duplicate any > information from this note; and (iii) please contact the author. > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave