[foxboro] Alarm Manager Configuration; user_disp and Foxpanel
- From: "Weiss, Andreas" <Andreas.Weiss@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 17 Jan 2008 03:42:29 -0600
Hi,
the alarm manager command "user_disp" functionality is based on the
Foxpanel or Annunciator keyboard configuration (/usr/fox/alarms/*pan
*tab files).
How can I configure a relationsship between display and compound:block
for ALL displays that we have? The Foxpanel configuration is limited to
a low number of buttons. This is acceptable for that specific case.
But what can I do in the case where I want create thousands of
relationsships between compound:blocks and displays? Or is it possible
to configure virtual buttons within Foxpanel or within the source files?
use case: The operator should be able to call up a display for every
compound:block in the current alarm display.
Regards,
Andreas
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Alarm Manager Configuration; user_disp and Foxpanel
