Re: [foxboro] foxboro Digest V8 #16
- From: "Weiss, Andreas" <Andreas.Weiss@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 17 Jan 2008 03:32:54 -0600
> "Do all of the alarms show up in the Current
> Alarm Display" on your specific workstation but won't=20
> initiate a light?
>=20
> Yes,=20
Hi,
please try to reconfigure your commgrp.cfg file.
1) delete the backup AW name
I assume that you have backup AWs configured in your commgrp.cfg
2) reboot
3) reconfigure your commgrp.cfg with backup AWs
4) reboot
I'm not sure if it helps.
Regards,
Andreas=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
