[elky] Re: New window wipes (felts)
- From: Dann Keller <kwhale22@xxxxxxxxxxx>
- To: Ray Buck et al <elky@xxxxxxxxxxxxx>
- Date: Wed, 28 Sep 2011 20:58:41 -0700
The "heavy duty" sound deadener was only an expedient. If'n I could have
foound the jute/fabric material like OEM I would have used that.
I don't know about the Blazer but the Elky take-apart and put-back on the doors
isn't bad at all. Having the right door panel tools was a big help. I was
able to get the tool for the window crank at Auto Zone and the one for the
retainer clips at NAPA; total outlay for the tools was about $12. Drop by and
I loan them to you; it will only cost you about $15 in gas to get up here and
back.
Dan
Date: Wed, 28 Sep 2011 09:58:21 -0700
From: printces@xxxxxxxxxxxx
To: elky@xxxxxxxxxxxxx
Subject: [elky] Re: New window wipes (felts)
thanks Dan. I've got the Blazers new seals sitting in a box and a healthy fear
of taking the door apart. You give me confidence, but also the info about the
sound deadener. I had not thought of that.
Mary
I just finished putting new door window wipes on the elky. It was not a hard
job but some aspects were a PITA. The old wipes were really shot and let the
glass really rattle around when the window was not all the way up or all the
way down. As well, some of the outer wiper material was so brittle it had
broken off and any water on the window went straight down into the door.
Unbeknowst to me, the drivers door innards had been accessed before; for what
reason I don't know. I'm just the second owner and the original owner was
pretty straight forward but didn't mention having work done inside the door.
But whoever did it left off the waterproof paper lining as well as the jute
insulation. There was a slight coating of rust in a couple of places so I
sanded those down and used Eastwood encapsulator on them. They should last
anothe 28 years with luck.
Since I wanted to get the project completed and didn't want to wait for some
catalog-ordered OEM-type replacement insulation, and couldn't find find any
locally I went to Plan B -- I got some sound deadening sheet material from a
local car audio store. Not the easiest stuff to work with but after it's in it
works great. Door slams with a solid "clunk" with no metal sounds or rattles
at all. FWIW the stuff I used was 'Roadkill' under the Stinger brand.
The weather is supposed to be nice tomorrow so it's back to working outside
while I can. You know how it is, sometimes it rains up here in Washington.
Dan
Other related posts:
