[elky] Re: ECM
- From: Chris Lindh <chris@xxxxxxxxxxxxxxxxx>
- To: elky@xxxxxxxxxxxxx
- Date: Wed, 24 Nov 2010 16:21:09 -0500
I sent JC the ones I had. I found those in Astro vans at the U-Pull-It.
On Wed, Nov 24, 2010 at 3:57 PM, Jared Ryan <jryan@xxxxxxxxxxxx> wrote:
> My only complaint is the cold-start issue. It'll start strong, then die
> after half a minute or so. Sometimes it will do that more than once. Once
> it stops that, it runs fine and starts fine when warm. It doesn't do this
> when the outside temperature is 85 or 90 F.
>
> I'd just like to try a pickup calibration, since they seem to be more
> conservative and tolerant of varying conditions, before messing with the
> programming in the 9C1 calibration much. There are several '747 .bin files
> for 5.7L engines on the diy-efi.org site.
>
> I'll check eBay. It's a very common ECM so it won't be hard to find one.
>
>
> On Nov 24, 2010, at 2:53 PM, John Christensen wrote:
>
>> That's the one I use and I have a spare but need to keep it. Sorry. I have
>> found them on eBay cheap.
>>
>> I wish I knew what to change on mine. I would like to make the timing curve
>> work better. I have it advanced as far as I can but it flattens out just off
>> idle.
>
>
>
Rules: Please play nicely with others.
-List members page (text & pic links):
http://www.myelcamino.net/eclist.htm
-List members page (all pics):
http://www.myelcamino.net/ec_list.htm
Other related posts:
