[elky] Re: ECM
- From: Jared Ryan <jryan@xxxxxxxxxxxx>
- To: elky@xxxxxxxxxxxxx
- Date: Wed, 24 Nov 2010 14:57:00 -0600
My only complaint is the cold-start issue. It'll start strong, then die after
half a minute or so. Sometimes it will do that more than once. Once it stops
that, it runs fine and starts fine when warm. It doesn't do this when the
outside temperature is 85 or 90 F.
I'd just like to try a pickup calibration, since they seem to be more
conservative and tolerant of varying conditions, before messing with the
programming in the 9C1 calibration much. There are several '747 .bin files for
5.7L engines on the diy-efi.org site.
I'll check eBay. It's a very common ECM so it won't be hard to find one.
On Nov 24, 2010, at 2:53 PM, John Christensen wrote:
> That's the one I use and I have a spare but need to keep it. Sorry. I have
> found them on eBay cheap.
>
> I wish I knew what to change on mine. I would like to make the timing curve
> work better. I have it advanced as far as I can but it flattens out just off
> idle.
Rules: Please play nicely with others.
-List members page (text & pic links):
http://www.myelcamino.net/eclist.htm
-List members page (all pics):
http://www.myelcamino.net/ec_list.htm
Other related posts:
