It wasn't visible in the print document. It showed up as a q code but when I
did a search and replace for the exact code that showed up in the braille
document, it was not found.
_____
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Steve Dresser
Sent: Friday, May 29, 2015 11:18 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: question about symbols not recognized by search and
replace or find
Ann,
You'd probably have better luck figuring out the symbol from the print
document if you had it. You might try back-translating the braille file
just to see what you'd get, but that might not be the original character as
back-translation doesn't always yield accurate results. However, if you can
find the actual print symbol, you can copy and paste it into the Find edit
box of the Find/Replace dialog and replace it with nothing to get rid of it.
Steve
----- Original Message -----
From: Ann <mailto:annfoxworth@xxxxxxxxxxxxx> Foxworth
To: duxuser@xxxxxxxxxxxxx
Sent: May 26, 2015 16:06
Subject: [duxuser] question about symbols not recognized by search and
replace or find
My document is about 480 pages in braille. Someone put a code in that
results in the following being sprinkled throughout the document. Neither
search and replace or find will recognize it. I'm using version 11.3. The
symbos consist of dots 3,6 dots 3,6 dots 5,6
Ann Foxworth
