To get to the setting center in JAWS, do the following:
1. Using the Jaws key on your numpad hold and press the number 6 in the number
row of your main keyboard.
2. Tab over once and also make sure that you have Duxbury opened when you do
this.
3. Press the letter B and arrow down once. Then press the right arrow key.
4. Arrow down once more then press the right arrow key again. You should be on
Translation.
5. Press the the down arrow key until you come to oupput and change it to
computer braille by pressing the spacebar. Once you have computer braille, tab
to apply and then tab to OK.
Make sure you have the setting center close and unload JAWS and restart JAWS.
See if that fixed your problem.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> On Behalf Of
Jeanne Fike
Sent: Sunday, November 14, 2021 3:00 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: question about extra dots and symbols on my Brailliant
bi 40 display
Hi,
I have a HumanWare Brailliant Bi 40 display and just disabled the 8-dot
braille. Where do I find the braille translation is in the settings center?
Jeanne
On 11/14/21, Diana Brent <dlbrent50@xxxxxxxxx> wrote:
Hello, Jean:* * *
I am wondering if you are in 8-dot braille. What braille display are
you using? You can go into JAWS Settings centre and check that 8-dot
braille is off and also braille translation is off for braille files
in DBT, since you don’t want JAWS translating braille that is already
translated,
Diana
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> on
behalf of Jeanne Fike <jmw9371@xxxxxxxxx>
Sent: Sunday, November 14, 2021 8:44:58 AM
To: duxuser@xxxxxxxxxxxxx <duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] question about extra dots and symbols on my
Brailliant bi
40 display
Hi,
Recently, my husband had to change out my video card on my computer.
When I try translating a document into braille, there are extra dots
and symbols showing. Any suggestions to get rid of them? I am running
DBT 12.5 on Windows 10 with JAWS 2022.
Jeanne
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting www.freelists.org<//www.freelists.org> .
The list archive
* is also located there.
* Duxbury Systems' web site is
www.duxburysystems.com<http://www.duxburysystems.com>
* * *
