[duxuser] Re: dbt and everest embosser
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 20 Jan 2007 19:43:15 -0000
Glad to have helped.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Armando
Maldonado
Sent: 20 January 2007 19:36
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: dbt and everest embosser
awesome, thanks, I use the standard paper, 8 by 11.
----- Original Message -----
From: George Bell
<mailto:george@xxxxxxxxxxxxxxxxxxx>
To: duxuser@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007 11:34 AM
Subject: [duxuser] Re: dbt and everest embosser
It all depends on paper size. For example, 12 inch
deep paper on an Index will usually allow a maximum of 29
lines single-sided. Consequently if you have a top margin
of one line, and 29 lines per page, only 28 lines of braille
will fit on to the page. If there is a 29th line, it will
overflow on to the second page.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Armando
Maldonado
Sent: 20 January 2007 19:27
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: dbt and everest embosser
so by doing this, will teh brialle run over the
bottom margin? That's what I'm afraid of. Thanks.
Armando
----- Original Message -----
From: George Bell
<mailto:george@xxxxxxxxxxxxxxxxxxx>
To: duxuser@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007 11:22 AM
Subject: [duxuser] Re: dbt and everest
embosser
Oops, sorry. The same principal applies
though. 26 lines + 1 for Top Margin means allowing for 27
lines in total on the page.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Armando
Maldonado
Sent: 20 January 2007 19:19
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: dbt and everest
embosser
the top margin is est at 1.
----- Original Message -----
From: George Bell
<mailto:george@xxxxxxxxxxxxxxxxxxx>
To: duxuser@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007
11:16 AM
Subject: [duxuser] Re: dbt and
everest embosser
Hi Armando,
If you have a binding margin of 3
cells, and 30 cells per line, you will have to allow for 33
cells in total per line.
Try reducing your characters per
line to 28 or 29.
Likewise, if you have a top margin a
3 lines and wish to print 26 lines, you will need to allow
for a total of 29 lines.
George.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Armando
Maldonado
Sent: 20 January 2007 19:08
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] dbt and everest
embosser
Hello Members,
I'm using dbt 10.6 with an everst
embosser version II. For some reason, I cannot get dbt to
work properly with the embosser. What happens is that the
page number appears on the second line rather than on the
right side of page, and the braille goes over the margin. I
have set the embosser to characters per line at 32, left
margin, b margin, top margin and bottom margin all to zero.
The lines per page is set at 26. In DBT, I have it set to
the following: characters per line, 30, binding margin 3,
top margin 1, right most placement cell at 32. If you can
please tell me what I need to change in order for the two to
communicate properly, this would be appreciated. Thanks.
Armando
________________________________
No virus found in this incoming
message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database:
268.16.10/625 - Release Date: 1/13/2007 5:40 PM
________________________________
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database:
268.16.10/625 - Release Date: 1/13/2007 5:40 PM
________________________________
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.10/625 -
Release Date: 1/13/2007 5:40 PM
Other related posts:
