[duxuser] Re: codes
- From: "Deborah Barnes" <dbarnes@xxxxxxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 6 May 2004 08:39:58 -0400
Hey thanks. I didn't know this one.
Deb B.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
Sent: Wednesday, May 05, 2004 5:00 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: codes
The keystroke is alt plus a for replace all.
Ann Foxworth, Braille Consultant
Department of Assistive and Rehabilitative Services, Division for Blind
Services
Criss Cole Rehabilitation Center
4800 N. Lamar BLVD
Austin, TX 78756
PH: (512) 377-0353
E-mail: ann.foxworth@xxxxxxxxxxxxxxxx
-----Original Message-----
From: Susan Stageberg [mailto:stageberg.susan@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, May 05, 2004 3:57 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: codes
Fina, I do the same routine, but instead of Control-A for replace all, I
tab to OK, then tab to replace all. So after you put in what you're
searching for and what you want to replace it with, if anything, you
have to hit Enter twice, making sure you have said "all" on the second
one. There's probably a hot key but sometimes those do funny things.
(That's a scientific explanation, mind you.)
Susie Stageberg
Project ASSIST with Windows
Iowa Department for the Blind
(515) 281-1351
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
On Behalf Of FinaCurrey
Sent: Wednesday, May 05, 2004 1:28 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: codes
Hello Steve and Listers:
Here are the steps i take to delete and replace codes:
1. I go to top of document.
2. I Press f6.
3. I then press ctrl-left bracket.
4. I type in the code just as I see it, eg. es~b.
5. I tab to ok because i usually don't put anything in the "replace"
field.
Am I correct?
Thanks for all your help and suggestions.
Respectfully,
Fina B. Currey
fcurrey@xxxxxxxxxxxxx
6. I then press ctrl-a for "replace all".
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
