My Institution will probably have to buy a new braille printer. We now
print most of school text books on index 4wave an we just notice that some
dots are not readable. We will try to repaire it.
Anyway, is printing easier/cheaper on fan (z) paper nowdays or on regular?
We noticed the heads on our other table top braille printers soon start to
loose the grip to pull the paper one by one and we have to do it by
ourselves. So thus could be then the reason to buy a z folded braille
printer. What do you think?
Thanks for your opinion.
Nina from Slovenia
V tor., 16. jun. 2020 18:05 je oseba Milton <mota1252@xxxxxxxxx> napisala:
Hello,
I’m using the Index Basic D5 and when I got it it came with drivers that
were on a thumb drive and that the driver had to be installed. Once the
driver was installed you will need to go into the properties to set some
configuration. I had to get help to do that with tech support from
Humanware.
I had an older Index Basic D4 before my 5 and that one had to be setup
using the Generic Text Printer Driver.
It will help very much if the original poster of this thread would have
given the model number of the Index embosser so that the question could be
specifically answered.
Milton
*From:* duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> *On
Behalf Of *Eileen Scrivani (Redacted sender "etscrivani" for DMARC)
*Sent:* Tuesday, June 16, 2020 10:14 AM
*To:* duxuser@xxxxxxxxxxxxx
*Subject:* [duxuser] Re: Setting up DBT with an Index embosser
Barry,
I have a friend who recently needed to install drivers for an older Index
printer. I don’t know the exact model they use. She was able to find the
driver name in the manual for the printer. I don’t have more information
other to say that the Index needs to be connected directly to a USB port
and not through a USB hub.
HTH.
Eileen
*From:* Barry (Redacted sender "ausbarron" for DMARC)
*Sent:* Tuesday, June 16, 2020 10:01 AM
*To:* duxuser@xxxxxxxxxxxxx <duxuser@xxxxxxxxxxxxx>
*Subject:* [duxuser] Setting up DBT with an Index embosser
Hi to All,
I need to set up DBT 12 with an Index Version 3 embosser. I have a
computer running Windows 10.
I understand I need to set up my embosser as a Windows printer Do I need
to download a driver, and if so, which one do I use? I looked on the Index
site and there seem to be a couple that might work.
I’m grateful for any assistance.
Barry.
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
