[duxuser] Re: Juliet Classic and Windows 7
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Fri, 4 Dec 2009 14:11:03 -0000
Hi David,
Didn't we go through this a while back on your old system?
I presume you have a USB to Parallel or USB to Serial adaptor cable.
The trick is to establish which USB Port the cable has connected
itself to, or has it created a USB Virtual Printer Port. Tricky to
tell without knowing the exact make and model of cable.
You then install a Generic/Text Only printer on that USB Port.
Finally in DBT's Global: Embosser Setup you need to set the Output
Option to Printer, and point it to the Generic/Text Only printer you
installed above.
Not exactly a walk in Central Park, but doable.
George.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of David R Stayer
Sent: 02 December 2009 23:42
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Juliet Classic and Windows 7
My question is how do I get windows 7 to recognize a Juliet Classic
embosser? I have it connected via a cable to a usb port in my dell
desk top.
Each day is a precious gift
David R. Stayer, LCSW
__________ Information from ESET Smart Security, version of virus
signature database 4656 (20091202) __________
The message was checked by ESET Smart Security.
http://www.eset.com
Other related posts:
