Unless the embosser manufacturer suggests otherwise, you should normally choose the Generic printer from the printer list as the printer you want to use to send any file to your embosser from your computer. In DBT, Unless there is a strong reason for not doing so, you should choose the appropriate embosser driver from the embosser list under Global settings. Sincerely: Dave Durber On Sat, 8 May 2004 19:14:33 -0500, you wrote: >Hello Listers, > >I have an old VersaPoint embosser. >When I send a document to the embosser, the printer does not Braille, >although the embosser is connected and turned on. >It seems that my PC is sending it to the Kurzweille virtual printer. >When I look at my start menu, settings, printers, the VersaPoint is >not there. >Of course, when I try to add a printer, the VersaPoint name does not >appear in the 76 choices. >Would I choose generic printer? >Is there another suggestion anyone might share with me as to why I am >unable to emboss a document sent by Duxbury? >My VersaPoint does show up in Duxbury's global settings. >Thank you. > >Kathleen G. Lueders >kgl8048@xxxxxxxxxxxxx > > > >* * * >* This message is via list duxuser at freelists.org. >* To unsubscribe, send a blank message with >* unsubscribe >* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also >* subscribe, unsubscribe, and set vacation mode and other subscription >* options by visiting //www.freelists.org. The list archive >* is also located there. >* Duxbury Systems' web site is http://www.duxburysystems.com >* * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *