[duxuser] Re: 2013 Calendar
- From: "Diane Scalzi" <dscalzi@xxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 24 Nov 2012 01:28:45 -0500
Mine gave the same message, but the one page I embossed printed fine.
Diane
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Barbara Sheinbein
Sent: Friday, November 23, 2012 8:44 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: 2013 Calendar
I can see that my first message may not of been very clear. I do have as my
default settings the 8.5 by 11 inches in Duxbury. My concern was the
message which came up when I opened up the calendar file which appears to be
indicating that is set up for the larger paper size. If I go ahead and
emboss it, the results could be a mess. I did not try it out to confirm it.
It just seems to me that if a document was designed for one size that some
adjustments would have to be made for it to work on a different size.
Barbara
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Diane Scalzi
Sent: Friday, November 23, 2012 7:06 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: 2013 Calendar
Just go into embosser setup under the documents menu and change the paper
size from narrow width 12 inches long Braille paper to narrow width 11
inches long Braille paper. Hope this helps.
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Barbara Sheinbein
Sent: Friday, November 23, 2012 7:41 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] 2013 Calendar
Hello,
I downloaded the 2013 Braille calendar provided earlier on this list. Well
I have a Basic D Index printer. I am using paper of 8.5 by 11 inches since
this is all I have. When I attempted to open the print version, I got a
message about wrong paper size.
Is there a way to adjust the document for my paper size without going to a
lot of work? If so, please explain.
Thanks in advance for any help.
Barbara
Other related posts:
